EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

NUMERICAL SIMULATION ON THE MECHANICAL BEHAVIOR OF MATERIALS IN STRENGTHENED BRIDGE COMPRESSION MEMBERS USING ABAQUS

Aojie Li, Ruochen Sun, Han Hu, Tao Guo, Yi Liu, Mao Ye

International Journal of Materials Engineering and Technology · 10.03.2026 · 25 (1) · 43-55

DOI: 10.17654/0975044426003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Materials Engineering and Technology, online erschienen am 10.03.2026. Verfasst von Aojie Li und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The bridge structure using a single compressive material plays an important role in history, especially after the industrial revolution, the steel is becoming cheaper, but many ancient building cases represented by the compressive material structure bridge still show the life span far beyond that of modern buildings. This study focuses on the arch bridge structure, and compares the effects of different number of arch holes (2, 4, 6 arch) and arch thickness (0.5m, 0.6m, 0.7m) on the ultimate bearing capacity, buckling stability and seismic response. The results show that the ultimate bearing capacity can be increased by about 30% when the arch thickness increases by 0.1M, and the stress increase tends to be gentle when the number of arch holes exceeds 4, indicating that the degradation rate of structural stiffness decreases. Buckling analysis shows that the single compression material bridge is sensitive to lateral instability, but its advantage over composite material is that it does not need to consider the corrosion problem in the conforming material, which significantly reduces the later maintenance cost. Under the action of seismic load, a single material can increase its toughness through plastic deformation energy consumption, which can provide theoretical support for the repair of cultural heritage bridges.

Zitieren

APA

Li, A., Sun, R., Hu, H., Guo, T., Liu, Y., & Ye, M. (2026). NUMERICAL SIMULATION ON THE MECHANICAL BEHAVIOR OF MATERIALS IN STRENGTHENED BRIDGE COMPRESSION MEMBERS USING ABAQUS. International Journal of Materials Engineering and Technology, 25(1), 43-55. https://doi.org/10.17654/0975044426003

Vancouver

Li A, Sun R, Hu H, Guo T, Liu Y, Ye M. NUMERICAL SIMULATION ON THE MECHANICAL BEHAVIOR OF MATERIALS IN STRENGTHENED BRIDGE COMPRESSION MEMBERS USING ABAQUS. International Journal of Materials Engineering and Technology. 2026;25(1):43-55. doi:10.17654/0975044426003

BibTeX
@article{Li2026,
  author = {Li, Aojie and Sun, Ruochen and Hu, Han and Guo, Tao and Liu, Yi and Ye, Mao},
  title = {NUMERICAL SIMULATION ON THE MECHANICAL BEHAVIOR OF MATERIALS IN STRENGTHENED BRIDGE COMPRESSION MEMBERS USING ABAQUS},
  journal = {International Journal of Materials Engineering and Technology},
  year = {2026},
  volume = {25},
  number = {1},
  pages = {43--55},
  doi = {10.17654/0975044426003}
}
Kostenlos starten →