A METHOD FOR MEASURING SHALLOW SUBSURFACE TEMPERATURE IN FRICTION PAIRS
JP Journal of Heat and Mass Transfer · 01.07.2026 · 39 (4) · 653-678
DOI: 10.17654/0973576326033 ↗Kurz gefasst
Fachartikel in der Zeitschrift JP Journal of Heat and Mass Transfer, online erschienen am 01.07.2026. Verfasst von Liangbi Wang und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
To address the difficulty of accurately acquiring transient temperature responses at the surface and near-surface region of friction pairs, a shallow subsurface temperature measurement method based on shallowly embedded fine thermocouples is proposed. In this method, NiCr and constantan wires with a diameter of 0.025 mm are used to fabricate E-type fine thermocouples. By combining electrolytic etching and arc-discharge welding, the size of the sensing junction is controlled to approximately 0.02 mm, thereby improving the sensor’s response capability to transient temperature rise. Metal films with a thickness equal to the shallow subsurface depth are covered above the thermocouple to establish equivalent measurement depths between the friction surface and the sensing junction, thus enabling indirect characterization of the shallow subsurface temperature response of the friction pair. To evaluate the performance of the measurement system, static calibration tests and laser step dynamic response tests were carried out for the fine thermocouples. The results show that, after electrolytic etching, the negative-step time constant of the thermocouple decreases from 53.350 ms in the unetched state to 17.338 ms, representing a reduction of approximately 67.5%. This indicates that tip refinement can significantly reduce the thermal inertia of the sensing junction and improve the dynamic response speed. Furthermore, feasibility verification was conducted on a pin-on-disc friction test platform. Under the conditions of a normal load of 30 N and a rotational speed of 0.0785 m/s, the shallowly embedded fine thermocouple produced a clear transient temperature response signal when the friction pin passed over the measurement point. The results demonstrate that the proposed method has the advantages of simple structure, rapid response, and convenient synchronous acquisition. It can be applied to shallow subsurface temperature measurement of friction pairs and provides an experimental basis for analyzing the generation, transfer, and evolution of frictional heat in the near-surface region.
Zitieren
APA
Wang, L., Hou, T., Hou, T., Wang, L., Zhang, J., Lu, X., & Wang, L. (2026). A METHOD FOR MEASURING SHALLOW SUBSURFACE TEMPERATURE IN FRICTION PAIRS. JP Journal of Heat and Mass Transfer, 39(4), 653-678. https://doi.org/10.17654/0973576326033
Vancouver
Wang L, Hou T, Hou T, Wang L, Zhang J, Lu X, et al. A METHOD FOR MEASURING SHALLOW SUBSURFACE TEMPERATURE IN FRICTION PAIRS. JP Journal of Heat and Mass Transfer. 2026;39(4):653-678. doi:10.17654/0973576326033
BibTeX
@article{Wang2026,
author = {Wang, Liangbi and Hou, Tai-Kun and Hou, Tai-Kun and Wang, Lu and Zhang, Jian-Peng and Lu, Xin and Wang, Liang-Bi},
title = {A METHOD FOR MEASURING SHALLOW SUBSURFACE TEMPERATURE IN FRICTION PAIRS},
journal = {JP Journal of Heat and Mass Transfer},
year = {2026},
volume = {39},
number = {4},
pages = {653--678},
doi = {10.17654/0973576326033}
}
EUVIMED