EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

EXPERIMENTAL STUDY ON THE RESISTANCE CHARACTERISTICS OF AN OIL COOLER FILTER ELEMENT

Z. J. Yin, L. B. Wang, S. Q. Zhu, T. K. Hou, P. F. Cui, B. Zhang

JP Journal of Heat and Mass Transfer · 01.07.2026 · 39 (4) · 615-640

DOI: 10.17654/0973576326031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift JP Journal of Heat and Mass Transfer, online erschienen am 01.07.2026. Verfasst von Z. J. Yin und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to the flow path constraints of the lubrication oil cooling system on the NY6240ZJA diesel engine, the oil cooler is positioned downstream of the oil filter. This configuration poses a potential risk to the lubrication system. To prevent debris in the piping and heat exchanger from entering the main oil gallery, installing a filter element at the oil cooler outlet has been identified as an effective countermeasure. However, the addition of such filter element significantly increases the flow resistance on the oil side. It is therefore necessary to investigate the feasibility of their installation and to characterize the resistance behavior of filter element with specific mesh sizes. This paper presents an experimental investigation into the resistance characteristics of filter element with varying mesh numbers under different temperature conditions. The results indicate that, regardless of the oil temperature, the strainer - due to its limited flow area - induces an excessive system pressure drop and restricts the flow rate, thereby preventing the system from achieving the rated flow. During a temperature sweep from 50°C to 90°C, the flow-resistance characteristics of filter element with different mesh sizes were systematically measured. The experimental results demonstrate that with the filtration devices installed, the pressure drop increases with higher mesh numbers and higher flow rates, and decreases with rising oil temperature. An empirical correlation for the resistance coefficient of the filter element was derived. The findings of this study provide valuable reference data for the process improvement of the lubrication oil cooling system and the design of oil coolers for the NY6240ZJA diesel engine.

Zitieren

APA

Yin, Z. J., Wang, L. B., Zhu, S. Q., Hou, T. K., Cui, P. F., & Zhang, B. (2026). EXPERIMENTAL STUDY ON THE RESISTANCE CHARACTERISTICS OF AN OIL COOLER FILTER ELEMENT. JP Journal of Heat and Mass Transfer, 39(4), 615-640. https://doi.org/10.17654/0973576326031

Vancouver

Yin ZJ, Wang LB, Zhu SQ, Hou TK, Cui PF, Zhang B. EXPERIMENTAL STUDY ON THE RESISTANCE CHARACTERISTICS OF AN OIL COOLER FILTER ELEMENT. JP Journal of Heat and Mass Transfer. 2026;39(4):615-640. doi:10.17654/0973576326031

BibTeX
@article{Yin2026,
  author = {Yin, Z. J. and Wang, L. B. and Zhu, S. Q. and Hou, T. K. and Cui, P. F. and Zhang, B.},
  title = {EXPERIMENTAL STUDY ON THE RESISTANCE CHARACTERISTICS OF AN OIL COOLER FILTER ELEMENT},
  journal = {JP Journal of Heat and Mass Transfer},
  year = {2026},
  volume = {39},
  number = {4},
  pages = {615--640},
  doi = {10.17654/0973576326031}
}
Kostenlos starten →