EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Methods for evaluation of corrosion rate on magnesium alloys: a review

Juan Guillermo Castaño-González, Luisa Fernanda Berrío, Félix Echeverría, Esteban Correa, Alejandro A. Zuleta

Revista Facultad de Ingeniería Universidad de Antioquia · 30.01.2024

DOI: 10.17533/udea.redin.20240102 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Revista Facultad de Ingeniería Universidad de Antioquia, online erschienen am 30.01.2024. Verfasst von Juan Guillermo Castaño-González und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 143 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The major drawback of some magnesium alloys is their low corrosion resistance. Therefore, the evaluation of corrosion resistance is a critical factor in developing new alloys and surface treatments. The techniques employed for the determination of corrosion rate include mass loss assessment, hydrogen evolution, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS). However, there are still difficulties in precisely estimating this parameter in Mg alloys. In this review, the reported applications, advantages, and disadvantages of the techniques mentioned above were analyzed. On the other hand, a large number of corrosion rate values reported for various Mg alloys in 3 different media (NaCl, Hanks´ solution and SBF), using mass loss, hydrogen evolution, and PP, were compared and analyzed. Generally, corrosion rates obtained from mass loss are higher than those obtained from hydrogen evolution. On the other hand, it is not possible to obtain correlations between corrosion rates obtained from PP and those obtained from mass loss and hydrogen evolution. Even more, dissimilar corrosion rate values are reported for the same alloy, implying that the measuring procedures are not well standardized.

Zitieren

APA

Castaño-González, J. G., Berrío, L. F., Echeverría, F., Correa, E., & Zuleta, A. A. (2024). Methods for evaluation of corrosion rate on magnesium alloys: a review. Revista Facultad de Ingeniería Universidad de Antioquia. https://doi.org/10.17533/udea.redin.20240102

Vancouver

Castaño-González JG, Berrío LF, Echeverría F, Correa E, Zuleta AA. Methods for evaluation of corrosion rate on magnesium alloys: a review. Revista Facultad de Ingeniería Universidad de Antioquia. 2024. doi:10.17533/udea.redin.20240102

BibTeX
@article{CastaoGonzlez2024,
  author = {Castaño-González, Juan Guillermo and Berrío, Luisa Fernanda and Echeverría, Félix and Correa, Esteban and Zuleta, Alejandro A.},
  title = {Methods for evaluation of corrosion rate on magnesium alloys: a review},
  journal = {Revista Facultad de Ingeniería Universidad de Antioquia},
  year = {2024},
  doi = {10.17533/udea.redin.20240102}
}
Kostenlos starten →