EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of Mechanical Characteristics and Structural Optimization of Continuous Mining Machine Track Based on Two-Way Coupling

Xunan Liu, yongqiang Dong, Faquan Li, Yadong Wang, Lijuan Zhao, Jianyong Wang

Eksploatacja i Niezawodność – Maintenance and Reliability · 23.02.2026

DOI: 10.17531/ein/218130 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eksploatacja i Niezawodność – Maintenance and Reliability, online erschienen am 23.02.2026. Verfasst von Xunan Liu und 5 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During the cutting process of continuous miners, track plates are prone to deformation and damage, adversely affecting operational reliability and production efficiency. This study focuses on the EML340 continuous miner and establishes a simulation model based on the Discrete Element Method–Multi-Flexible Body Dynamics (DEM-MFBD) bidirectional coupling technology. Simulation results indicate that the load is mainly concentrated on the tight side of the track, with increasing intensity near the drive sprocket. The original track plate exhibits a maximum equivalent stress of 758.2 MPa and a safety factor of only 1.22. To address this issue, a multi-objective genetic algorithm implemented on the ISIGHT platform was employed to optimize the track plate structure, aiming to reduce weight and improve the safety factor. The optimized track plate weighs 25.42 kg, achieving a 9.2% reduction in weight compared to the original design, while the safety factor increases from 1.22 to 1.43. Industrial tests demonstrate that the optimized track plate operates without failure during service.

Zitieren

APA

Liu, X., Dong, Y., Li, F., Wang, Y., Zhao, L., & Wang, J. (2026). Analysis of Mechanical Characteristics and Structural Optimization of Continuous Mining Machine Track Based on Two-Way Coupling. Eksploatacja i Niezawodność – Maintenance and Reliability. https://doi.org/10.17531/ein/218130

Vancouver

Liu X, Dong Y, Li F, Wang Y, Zhao L, Wang J. Analysis of Mechanical Characteristics and Structural Optimization of Continuous Mining Machine Track Based on Two-Way Coupling. Eksploatacja i Niezawodność – Maintenance and Reliability. 2026. doi:10.17531/ein/218130

BibTeX
@article{Liu2026,
  author = {Liu, Xunan and Dong, yongqiang and Li, Faquan and Wang, Yadong and Zhao, Lijuan and Wang, Jianyong},
  title = {Analysis of Mechanical Characteristics and Structural Optimization of Continuous Mining Machine Track Based on Two-Way Coupling},
  journal = {Eksploatacja i Niezawodność – Maintenance and Reliability},
  year = {2026},
  doi = {10.17531/ein/218130}
}
Kostenlos starten →