EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Deep learning-based CNC milling tool wear stage estimation with multi-signal analysis

Yunus Emre Karabacak

Eksploatacja i Niezawodność – Maintenance and Reliability · 13.06.2023 · 25 (3)

DOI: 10.17531/ein/168082 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eksploatacja i Niezawodność – Maintenance and Reliability, online erschienen am 13.06.2023. Verfasst von Yunus Emre Karabacak. Die Arbeit wurde bisher 18-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, the convolutional neural network (CNN), which is a deep learning method in which the features are extracted by an inner process, was performed to detect the wear stages of the milling tool. These stages that define the total lifespan of the tool are known as initial wear (IW), steady-state wear (SSW), and accelerated wear (AW). Short Time Fourier Transform (STFT) was applied to signals, and signal spectrograms were used to train CNN models with different complex architectures. Vibration signals, acoustic emission signals, and motor current signals from The Nasa Ames Milling Dataset were used to obtain the spectrograms. Pre-trained CNNs (GoogleNet, AlexNet, ResNet-50, and EfficientNet-B0) detected the tool wear stage with varying accuracies. It has been seen that the time duration of model training increases as the size of the dataset grows and the network architecture becomes more complex. The recommended method has also been tested on the 2010 PHM Data Challenge Dataset. CNN shows promise for condition monitoring of milling operations and detecting tool wear stage.

Zitieren

APA

Karabacak, Y. E. (2023). Deep learning-based CNC milling tool wear stage estimation with multi-signal analysis. Eksploatacja i Niezawodność – Maintenance and Reliability, 25(3). https://doi.org/10.17531/ein/168082

Vancouver

Karabacak YE. Deep learning-based CNC milling tool wear stage estimation with multi-signal analysis. Eksploatacja i Niezawodność – Maintenance and Reliability. 2023;25(3). doi:10.17531/ein/168082

BibTeX
@article{Karabacak2023,
  author = {Karabacak, Yunus Emre},
  title = {Deep learning-based CNC milling tool wear stage estimation with multi-signal analysis},
  journal = {Eksploatacja i Niezawodność – Maintenance and Reliability},
  year = {2023},
  volume = {25},
  number = {3},
  doi = {10.17531/ein/168082}
}
Kostenlos starten →