EFFECTS OF GLASS FIBER AND CARBON FIBER CONTENT ON TENSILE AND WATER ABSORPTION BEHAVIOR OF UV- CURED COMPOSITES
Uludağ University Journal of The Faculty of Engineering · 04.08.2026 · 31 (2) · 585-596
DOI: 10.17482/uumfd.1818083 ↗Kurz gefasst
Fachartikel in der Zeitschrift Uludağ University Journal of The Faculty of Engineering, online erschienen am 04.08.2026. Verfasst von Hakan Kazan und 1 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben.
Abstract (Originalsprache)
Advanced polymer composites are used with increasing frequency in automotive, aerospace and marine industries, due to their very low weights and high levels of mechanical properties. This work investigates the effect of adding 1 %, 5 % and 10 wt.% glass fibers (GF), and carbon fibers (CF) to a UV curable resin, to determine how the addition of these fibers affects the mechanical properties and moisture resistance of the composite material. Tensile properties were evaluated using ASTM D638 Type IV specimens, while water absorption characteristics were determined according to ASTM D570-98 over a 28-day immersion period. The neat resin exhibited an ultimate tensile strength (UTS) of 6.1 MPa with a water absorption of 3.6 %. Incorporating 10 wt.% GF resulted in a UTS of 14.3 MPa, while incorporating 10 wt.% CF resulted in a UTS of 19.3 MPa. GF-reinforced composites showed higher water absorption than CF-reinforced composites. However, the absorption levels of GF-reinforced composites ranged from 2.4 % to 3.2 %, while those of CF-reinforced composites ranged from 2.3-2.8 %. Overall, this study showed adding CF greatly improved both the strength and water-absorption resistance of the UV-curable resin system, making it a promising choice for lightweight parts exposed to moisture.
Zitieren
APA
Kazan, H., & Ata, M. S. (2026). EFFECTS OF GLASS FIBER AND CARBON FIBER CONTENT ON TENSILE AND WATER ABSORPTION BEHAVIOR OF UV- CURED COMPOSITES. Uludağ University Journal of The Faculty of Engineering, 31(2), 585-596. https://doi.org/10.17482/uumfd.1818083
Vancouver
Kazan H, Ata MS. EFFECTS OF GLASS FIBER AND CARBON FIBER CONTENT ON TENSILE AND WATER ABSORPTION BEHAVIOR OF UV- CURED COMPOSITES. Uludağ University Journal of The Faculty of Engineering. 2026;31(2):585-596. doi:10.17482/uumfd.1818083
BibTeX
@article{Kazan2026,
author = {Kazan, Hakan and Ata, Mustafa Sami},
title = {EFFECTS OF GLASS FIBER AND CARBON FIBER CONTENT ON TENSILE AND WATER ABSORPTION BEHAVIOR OF UV- CURED COMPOSITES},
journal = {Uludağ University Journal of The Faculty of Engineering},
year = {2026},
volume = {31},
number = {2},
pages = {585--596},
doi = {10.17482/uumfd.1818083}
}
EUVIMED