EUVIMEDEUVIMED entdecken
Crossref

ANALYZING THE MECHANICAL BEHAVIORS OF DENTAL MATERIALS UNDER THERMAL AND LOADING CONDITIONS USING FINITE ELEMENT MODELING

Murat Horasan, Murat Şenol

Uludağ University Journal of The Faculty of Engineering · 10.04.2026 · 31 (1) · 245-260

DOI: 10.17482/uumfd.1779891 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Uludağ University Journal of The Faculty of Engineering, online erschienen am 10.04.2026. Verfasst von Murat Horasan und 1 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Choosing the right restorative material is crucial in prosthetic dental treatments. Zirconia, lithium disilicate porcelains, and leucite-reinforced feldspathic porcelains are popular options because of their strong mechanical properties and outstanding aesthetics. In this study, finite element analyses were conducted to examine how these materials behave mechanically under a 450N compression load, under varying thermal conditions (5 °C, 22 °C, and 70 °C), and under loading scenarios (distributed, combined, vertical, or angular). Zirconia exhibited the highest peak stresses, reaching a maximum principal stress value of 184.89 MPa under 70°C and 30° oblique loading. However, it maintained the highest safety margin, utilizing only 20.5% of its 900 MPa flexural strength. In contrast, it was observed that leucitereinforced porcelain reached 78.3% of the 160 MPa strength under the same conditions, making it the material with the lowest safety margin. It was determined that extreme temperature (70 °C) and oblique loading (30°) were the primary causes of stress intensification. It was observed that combined loading significantly increased localized surface stress concentrations at the occlusal contact points and cervical margins.

Zitieren

APA

Horasan, M., & Şenol, M. (2026). ANALYZING THE MECHANICAL BEHAVIORS OF DENTAL MATERIALS UNDER THERMAL AND LOADING CONDITIONS USING FINITE ELEMENT MODELING. Uludağ University Journal of The Faculty of Engineering, 31(1), 245-260. https://doi.org/10.17482/uumfd.1779891

Vancouver

Horasan M, Şenol M. ANALYZING THE MECHANICAL BEHAVIORS OF DENTAL MATERIALS UNDER THERMAL AND LOADING CONDITIONS USING FINITE ELEMENT MODELING. Uludağ University Journal of The Faculty of Engineering. 2026;31(1):245-260. doi:10.17482/uumfd.1779891

BibTeX
@article{Horasan2026,
  author = {Horasan, Murat and Şenol, Murat},
  title = {ANALYZING THE MECHANICAL BEHAVIORS OF DENTAL MATERIALS UNDER THERMAL AND LOADING CONDITIONS USING FINITE ELEMENT MODELING},
  journal = {Uludağ University Journal of The Faculty of Engineering},
  year = {2026},
  volume = {31},
  number = {1},
  pages = {245--260},
  doi = {10.17482/uumfd.1779891}
}
Kostenlos starten →