EUVIMEDEUVIMED entdecken
Crossref

Electrochemical quantification of thymol in Thymus vulgaris essential oil with a 3D-printed electrode

Leticia Siqueira Da Silva, Jéssica Nívea Magalhães Rodrigues, Mariana Mariana Fernanda Silva De Oliveira, Pablo Henrique Silva Martins, Hugo Leonardo Souza Lara Leão, Polyana Fernandes Pereira

Acta Chimica Slovenica · 25.09.2026 · 73 (3) · 538-545

DOI: 10.17344/acsi.2026.9769 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Chimica Slovenica, online erschienen am 25.09.2026. Verfasst von Leticia Siqueira Da Silva und 5 weiteren Autor:innen. Beteiligte Einrichtung: Analytical Chemistry Laboratory, Instituto Federal Goiano, Rio Verde, Brazil. Hauptthemen laut MEDLINE: Thymol, Thymus Plant, Oils, Volatile, Electrochemical Techniques.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thymol (TM), a monoterpenoid phenol with diverse antioxidant and antimicrobial properties, is of significant interest to the pharmaceutical, food, and agricultural sectors. Due to its importance, this study developed an electrochemical method for its quantification using a 3D-printed electrode made from a conductive carbon black/PLA filament (CB/PLA electrode). Electrochemical measurements were performed using square-wave voltammetry (SWV) in 0.1 mol L–1 Na2SO4 (pH 13). The potential was scanned from 0 to +0.80 V, exploiting the oxidation process of TM at approximately +0.30 V (vs. Ag|AgCl|KCl(sat.)). Under the optimized SWV conditions, a linear response was obtained in the concentration range of 75.00 to 337.50 μg/mL (r = 0.99). The proposed method demonstrated excellent analytical characteristics, including high stability (RSD < 9%; n = 6) and a satisfactory recovery value (89%). These results suggest minimal matrix interference, confirming the method’s accuracy for analyzing real samples. This work highlights that the combination of 3D-printed electrodes and the SWV technique offers a selective approach for TM analysis. The reliability of the proposed method for quality control in thyme essential oil is confirmed, presenting a promising strategy for monitoring other bioactive compounds with a rapidly manufactured, reproducible, and low-cost electrode.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ThymolThymus PlantOils, VolatileElectrochemical TechniquesPrinting, Three-DimensionalElectrodesElectrochemistry

Substanzen

ThymolOils, Volatile

Autor:innen und Institutionen

  • Analytical Chemistry Laboratory, Instituto Federal Goiano, Rio Verde, Brazil.

Zitieren

APA

Da Silva, L. S., Rodrigues, J. N. M., De Oliveira, M. M. F. S., Martins, P. H. S., Leão, H. L. S. L., & Pereira, P. F. (2026). Electrochemical quantification of thymol in Thymus vulgaris essential oil with a 3D-printed electrode. Acta Chimica Slovenica, 73(3), 538-545. https://doi.org/10.17344/acsi.2026.9769

Vancouver

Da Silva LS, Rodrigues JNM, De Oliveira MMFS, Martins PHS, Leão HLSL, Pereira PF. Electrochemical quantification of thymol in Thymus vulgaris essential oil with a 3D-printed electrode. Acta Chimica Slovenica. 2026;73(3):538-545. doi:10.17344/acsi.2026.9769

BibTeX
@article{DaSilva2026,
  author = {Da Silva, Leticia Siqueira and Rodrigues, Jéssica Nívea Magalhães and De Oliveira, Mariana Mariana Fernanda Silva and Martins, Pablo Henrique Silva and Leão, Hugo Leonardo Souza Lara and Pereira, Polyana Fernandes},
  title = {Electrochemical quantification of thymol in Thymus vulgaris essential oil with a 3D-printed electrode},
  journal = {Acta Chimica Slovenica},
  year = {2026},
  volume = {73},
  number = {3},
  pages = {538--545},
  doi = {10.17344/acsi.2026.9769}
}
Kostenlos starten →