EUVIMEDEUVIMED entdecken
Crossref

Structure and mechanical properties of the porous TiNi alloys obtained by SHS method

Aleksandr S. Garin, Aleхander A. Kozulin, Gul’sharat A. Baygonakova, Ekaterina S. Marchenko

Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika · 2026 · (99) · 109-124

DOI: 10.17223/19988621/99/8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika, 2026. Verfasst von Aleksandr S. Garin und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the porous TiNi alloys produced by self-propagating high-temperature synthesis at reaction onset temperatures ranging from 395°C to 515°C were studied. Porosity, average pore size, and wall thickness were determined using optical coherence tomography. The porosity decreased from 63% to 58-59%; the pore size reached a minimum of 5.9 pm at 495°C and increased to 27.1 pm at 515°C. Wall thickness varied from 78.1 pm at 395°C to a minimum value of 28.4 pm at 495°C. The compressive mechanical response of the alloys was governed by the structural parameters of the porous framework. With decreasing porosity and average pore size, the elastic modulus increased from 1200-1300 MPa to 2400 MPa, the ultimate strength from ~65 MPa to 128 MPa, and the strain to failure from ~7% to ~14%. The most favorable combination of high strength and ductility was achieved at a temperature of435°C. The dependence of the ultimate strength aB on porosity was approximated by the Gibson-Ashby model with n = 3.2 (R2 = 0.98).

Zitieren

APA

Garin, A. S., Kozulin, A. A., Baygonakova, G. A., & Marchenko, E. S. (2026). Structure and mechanical properties of the porous TiNi alloys obtained by SHS method. Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika, 109-124. https://doi.org/10.17223/19988621/99/8

Vancouver

Garin AS, Kozulin AA, Baygonakova GA, Marchenko ES. Structure and mechanical properties of the porous TiNi alloys obtained by SHS method. Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika. 2026:109-124. doi:10.17223/19988621/99/8

BibTeX
@article{Garin2026,
  author = {Garin, Aleksandr S. and Kozulin, Aleхander A. and Baygonakova, Gul’sharat A. and Marchenko, Ekaterina S.},
  title = {Structure and mechanical properties of the porous TiNi alloys obtained by SHS method},
  journal = {Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika},
  year = {2026},
  number = {99},
  pages = {109--124},
  doi = {10.17223/19988621/99/8}
}
Kostenlos starten →