Mathematical Model of the Stress–Strain State of an Elastic Radially Inhomogeneous Cylindrical Body Accounting for the Porous Material Structure
Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika · 2026
DOI: 10.17223/19988621/102/4 ↗Kurz gefasst
Fachartikel in der Zeitschrift Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika, 2026. Verfasst von Elena V. Akindinova und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Increasing demands for the strength, reliability, and safety of engineering structures, together with the need to reduce their weight, dimensions, and cost, have stimulated the development of advanced functional materials with complex internal structures and spatially varying mechanical properties. This paper presents an analysis of the stress-strain state of an elastic radially inhomogeneous cylindrical body with explicit consideration of the material's porous structure. The inhomogeneity of elastic properties is simulated using general approximation functions, including non-monotonic distributions capable of representing the behavior of materials in the vicinity of underground excavations or in the regions subjected to impact loading. A poroelastic rheological model incorporating a rigid-contact element is employed to capture the transition from a porous to a compacted state, thereby describing the differential compressibility observed in natural and engineered porous media. The model also enables the representation of elastic-viscoplastic skeletal behavior during compaction. The proposed approach is applied to an axisymmetric boundary-value problem for a thick-walled cylinder subjected to uniform compressive loads. The effect of Poisson's ratio and approximation parameters on the distributions of radial and circumferential stresses, as well as displacements, is investigated. The numerical results demonstrate the convergence of the stress fields to the corresponding solution for a homogeneous material in the limiting case, thereby confirming the physical consistency of the proposed model. The developed methodology provides an efficient tool for analyzing inhomogeneous porous structures in geomechanics, civil engineering, and the design of advanced engineering materials.
Zitieren
APA
Akindinova, E. V., Gotsev, D. V., & Panina, N. V. (2026). Mathematical Model of the Stress–Strain State of an Elastic Radially Inhomogeneous Cylindrical Body Accounting for the Porous Material Structure. Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika. https://doi.org/10.17223/19988621/102/4
Vancouver
Akindinova EV, Gotsev DV, Panina NV. Mathematical Model of the Stress–Strain State of an Elastic Radially Inhomogeneous Cylindrical Body Accounting for the Porous Material Structure. Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika. 2026. doi:10.17223/19988621/102/4
BibTeX
@article{Akindinova2026,
author = {Akindinova, Elena V. and Gotsev, Dmitriy V. and Panina, Natal’ya V.},
title = {Mathematical Model of the Stress–Strain State of an Elastic Radially Inhomogeneous Cylindrical Body Accounting for the Porous Material Structure},
journal = {Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika},
year = {2026},
doi = {10.17223/19988621/102/4}
}
EUVIMED