EUVIMEDEUVIMED entdecken
Crossref

Dependence of the kinematic characteristics of a polymer melt vortex flow on flow rate and temperature

Mikhail S. Pavlov, Yuriy A. Pavlyuk, Grigoriy V. Pyshnograi

Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika · 2026

DOI: 10.17223/19988621/101/12 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika, 2026. Verfasst von Mikhail S. Pavlov und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the finite element method is used to study two-dimensional polymer melt flows in channels with a rectangular cross-section and a sudden contraction. The mathematical model is based on the Vinogradov-Pokrovsky rheological equation. Particular attention is paid to the effect of polymer melt temperature on the size of the recirculation zone formed upstream of the channel contraction. It is shown that a sudden contraction leads to the formation of a vortex flow region whose size increases with increasing melt temperature, in agreement with experimental observations. The dynamics of the vortex region variation in size is also investigated as a function of flow characteristics. It is found that, up to a certain critical value, an increase in the volumetric flow rate promotes faster attenuation of the vortex region. Thus, the corresponding temperature-dependence curves are located below. Beyond this point, the size of the vortex region continues to decrease; however, the rate of its reduction becomes lower as the flow rate increases. As a result, the corresponding temperature-dependence curves are shifted upward. In all cases considered, good agreement is observed between the numerical predictions and the experimental data. The obtained results show that the modified Vinogradov-Pokrovsky rheological model provides an adequate description of polymer melt flows in complex geometries. They also confirm the effectiveness of finite-element-based computational methods for simulating non-stationary two-dimensional flows of nonlinear viscoelastic media governed by a differential rheological equation.

Zitieren

APA

Pavlov, M. S., Pavlyuk, Y. A., & Pyshnograi, G. V. (2026). Dependence of the kinematic characteristics of a polymer melt vortex flow on flow rate and temperature. Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika. https://doi.org/10.17223/19988621/101/12

Vancouver

Pavlov MS, Pavlyuk YA, Pyshnograi GV. Dependence of the kinematic characteristics of a polymer melt vortex flow on flow rate and temperature. Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika. 2026. doi:10.17223/19988621/101/12

BibTeX
@article{Pavlov2026,
  author = {Pavlov, Mikhail S. and Pavlyuk, Yuriy A. and Pyshnograi, Grigoriy V.},
  title = {Dependence of the kinematic characteristics of a polymer melt vortex flow on flow rate and temperature},
  journal = {Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika},
  year = {2026},
  doi = {10.17223/19988621/101/12}
}
Kostenlos starten →