Determination of the maximum temperature of solid-propellant combustion products
Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika · 2026
DOI: 10.17223/19988621/101/10 ↗Kurz gefasst
Fachartikel in der Zeitschrift Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika, 2026. Verfasst von Aleksey M. Lipanov.
Abstract (Originalsprache)
This paper proposes a design solution to the problem of experimentally determining the temperature of the combustion products of a burning solid-propellant charge. To eliminate heat losses to the walls of the device during the combustion of the charge, the solid propellant is applied directly to the inner surface of the device's housing. A mathematical model describing the processes occurring in the free volume of the device during solid-propellant charge combustion is developed. The problem formulation is based on ordinary differential equations. An analytical solution is obtained for calculating the parameters in the free volume of the device during the combustion of the solid-propellant charge. For two representative cases, pressure and temperature curves are plotted as functions of the burnt crown of the charge. Conditions under which the experimentally measured boundary-layer temperature is equal to its theoretical value are determined. It is shown that, if the walls of the device used for the experimental determination of the boundary-layer temperature are covered with a layer of the solid propellant under study, the measured temperature becomes close to or coincides with the theoretical value.
Zitieren
APA
Lipanov, A. M. (2026). Determination of the maximum temperature of solid-propellant combustion products. Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika. https://doi.org/10.17223/19988621/101/10
Vancouver
Lipanov AM. Determination of the maximum temperature of solid-propellant combustion products. Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika. 2026. doi:10.17223/19988621/101/10
BibTeX
@article{Lipanov2026,
author = {Lipanov, Aleksey M.},
title = {Determination of the maximum temperature of solid-propellant combustion products},
journal = {Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika},
year = {2026},
doi = {10.17223/19988621/101/10}
}
EUVIMED