Optimization of the phase composition of a refractory using cracked inclusions to improve lining service life: modeling and experiment
Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika · 25.04.2026 · (100) · 73-88
DOI: 10.17223/19988621/100/7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika, online erschienen am 25.04.2026. Verfasst von Andrey V. Zabolotskiy und 3 weiteren Autor:innen.
Abstract (Originalsprache)
The interaction between a crack tip formed in the matrix of a refractory material under mechanical or thermomechanical loading and solid inclusions (grains) of various types is studied. It is shown that, when interacting with a dense inclusion without internal cracks, the crack is most likely to bypass the obstacle and propagate through the entire material. In contrast, if the inclusion contains internal defects, crack penetration into the inclusion becomes probable, followed by its gradual fracture, which leads to a retardation of damage evolution and, consequently, of the overall lining failure. However, introducing such inclusions in large quantities results in a reduction in the strength and high-temperature performance of the refractory. The optimization of the number of defective inclusions is based on their spatial arrangement so as to prevent crack tips from interacting only with dense defect-free grains when no significant retardation of crack growth occurs. At the same time, the number of inclusions with internal defects should be taken into account and minimized. Based on a mathematical model describing crack-inclusion interaction, the effectiveness of introducing inclusions with an internal cracked structure for slowing crack propagation in materials is demonstrated. This effect was also studied experimentally on refractory specimens subjected to thermomechanical failure. An optimal number of additive grains with an internal cracked structure was determined, and a successful industrial-scale experiment was conducted to validate a computational model of the working lining of a steel ladle. The results showed a reduction in the number of cracks and an increase in the service life of the equipment compared to standard refractory materials.
Zitieren
APA
Zabolotskiy, A. V., Migashkin, A. O., Platonov, A. A., & Dmitriev, A. I. (2026). Optimization of the phase composition of a refractory using cracked inclusions to improve lining service life: modeling and experiment. Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika, 73-88. https://doi.org/10.17223/19988621/100/7
Vancouver
Zabolotskiy AV, Migashkin AO, Platonov AA, Dmitriev AI. Optimization of the phase composition of a refractory using cracked inclusions to improve lining service life: modeling and experiment. Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika. 2026:73-88. doi:10.17223/19988621/100/7
BibTeX
@article{Zabolotskiy2026,
author = {Zabolotskiy, Andrey V. and Migashkin, Anton O. and Platonov, Anton A. and Dmitriev, Andrey I.},
title = {Optimization of the phase composition of a refractory using cracked inclusions to improve lining service life: modeling and experiment},
journal = {Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika},
year = {2026},
number = {100},
pages = {73--88},
doi = {10.17223/19988621/100/7}
}
EUVIMED