MECHANICAL AND MICROSTRUCTURAL BEHAVIOUR OF STIR-CAST AA7065–B4C–GRAPHITE HYBRID COMPOSITES WITH OPTIMIZED REINFORCEMENT CONTENT
Materiali in tehnologije · 04.06.2026 · 60 (3)
DOI: 10.17222/mit.2025.1626 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materiali in tehnologije, online erschienen am 04.06.2026. Verfasst von Madhan Baladhandapani und 1 weiteren Autor:innen.
Abstract (Originalsprache)
High-strength aluminium hybrids reinforced with ceramics and solid lubricants are used in structural and tribological parts. AA7065 supports precipitation hardening and the incorporation of B4C and graphite. Quantitative links between reinforcement content and mechanical behaviour remain limited for AA7065. This study quantifies the effect of B4C content at a near-constant graphite level on hardness, tensile metrics, and Izod impact energy. Hybrids containing 0–7 w/% B4C with 3 w/% graphite were produced by vortex-assisted stir casting, T6-treated, machined into ASTM E8 and ASTM D256 specimens, tested, and characterized using optical/SEM microscopy, followed by ANOVA response-surface analysis. Strengthening is evident, with hardness increasing from about 100 HV to about 130 HV (30 %), and tensile strength increasing from about 300 MPa to about 360 MPa (20 %) at 7 w/% B4C. Damage tolerance declined, with elongation decreasing from about 12 % to about 5 %, and Izod impact energy decreasing from about 20 J to about 12 J. The pattern is consistent with load transfer and dislocation blocking combined with particle-assisted void nucleation. These data guide reinforcement selection for AA7065–B4C–graphite composites used in high-strength parts with controlled deformability. Future work will target fatigue and wear response under service loading and evaluate graphite fraction and particle size as design variables.
Zitieren
APA
Baladhandapani, M., & Alagesan, P. (2026). MECHANICAL AND MICROSTRUCTURAL BEHAVIOUR OF STIR-CAST AA7065–B4C–GRAPHITE HYBRID COMPOSITES WITH OPTIMIZED REINFORCEMENT CONTENT. Materiali in tehnologije, 60(3). https://doi.org/10.17222/mit.2025.1626
Vancouver
Baladhandapani M, Alagesan P. MECHANICAL AND MICROSTRUCTURAL BEHAVIOUR OF STIR-CAST AA7065–B4C–GRAPHITE HYBRID COMPOSITES WITH OPTIMIZED REINFORCEMENT CONTENT. Materiali in tehnologije. 2026;60(3). doi:10.17222/mit.2025.1626
BibTeX
@article{Baladhandapani2026,
author = {Baladhandapani, Madhan and Alagesan, Parthiban},
title = {MECHANICAL AND MICROSTRUCTURAL BEHAVIOUR OF STIR-CAST AA7065–B4C–GRAPHITE HYBRID COMPOSITES WITH OPTIMIZED REINFORCEMENT CONTENT},
journal = {Materiali in tehnologije},
year = {2026},
volume = {60},
number = {3},
doi = {10.17222/mit.2025.1626}
}
EUVIMED