EUVIMEDEUVIMED entdecken
Crossref

CHARACTERIZATION OF ABACA-E-GLASS/EPOXY POLYMER COMPOSITES REINFORCED WITH BAMBOO-ACTIVATED CARBON NANOFILLERS

Lies Banowati, N. Chitraningrum, B. Mulyati

Materiali in tehnologije · 04.06.2026 · 60 (3)

DOI: 10.17222/mit.2025.1598 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materiali in tehnologije, online erschienen am 04.06.2026. Verfasst von Lies Banowati und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to investigate the effect of fiber volume fraction and NaOH treatment on the mechanical and physicochemical properties of hybrid abaca–E-glass/epoxy composites reinforced with bamboo-activated carbon nanofiller. Composites were fabricated using hand lay-up and vacuum bagging, with fiber volume fractions (Vf) of (40, 50 and 60) % and fiber orientations of 0° and (0/90)°. Meanwhile, the weight percentage of bamboo-derived activated carbon filler was 2 w/%. Tensile tests were conducted according to ASTM D3039, while morphological, elemental, and chemical characterizations were performed using SEM-EDS and FTIR analyses. The results show that the composite with a Vf of 50 % and 0° fiber orientation treated with NaOH exhibited the highest tensile strength of 56.62 MPa, compared to 46.08 MPa for untreated fibers, indicating improved interfacial adhesion due to alkali treatment and hybridization with E-glass fibers. SEM observations revealed relatively uniform nanofiller dispersion and predominant fiber fracture, whereas a higher Vf of 60 % led to void formation and reduced tensile strength. SEM-EDS confirmed dominant carbon content in the nanofiller (90.90 %), while FTIR spectra identified characteristic O–H, C=O, C–O–C, and Si–O–Si groups, demonstrating successful curing and good compatibility among fibers, nanofiller, and epoxy matrix. Overall, the optimized composite at a Vf of 50 % exhibits enhanced mechanical performance and interfacial interaction, highlighting its potential for lightweight structural and radar-absorbing applications.

Zitieren

APA

Banowati, L., Chitraningrum, N., & Mulyati, B. (2026). CHARACTERIZATION OF ABACA-E-GLASS/EPOXY POLYMER COMPOSITES REINFORCED WITH BAMBOO-ACTIVATED CARBON NANOFILLERS. Materiali in tehnologije, 60(3). https://doi.org/10.17222/mit.2025.1598

Vancouver

Banowati L, Chitraningrum N, Mulyati B. CHARACTERIZATION OF ABACA-E-GLASS/EPOXY POLYMER COMPOSITES REINFORCED WITH BAMBOO-ACTIVATED CARBON NANOFILLERS. Materiali in tehnologije. 2026;60(3). doi:10.17222/mit.2025.1598

BibTeX
@article{Banowati2026,
  author = {Banowati, Lies and Chitraningrum, N. and Mulyati, B.},
  title = {CHARACTERIZATION OF ABACA-E-GLASS/EPOXY POLYMER COMPOSITES REINFORCED WITH BAMBOO-ACTIVATED CARBON NANOFILLERS},
  journal = {Materiali in tehnologije},
  year = {2026},
  volume = {60},
  number = {3},
  doi = {10.17222/mit.2025.1598}
}
Kostenlos starten →