EUVIMEDEUVIMED entdecken
Crossref

DEVELOPMENT OF Cu- AND Fe-DOPED ZEOLITE-COATED CERAMIC FOAMS AS FUNCTIONAL CATALYSTS FOR AUTOMOTIVE NOx REDUCTION

Rajakrishnamoorthy P., N. Bakkiyaraj, P. Premkumar, Premnath Muthuvelu

Materiali in tehnologije · 09.04.2026 · 60 (2)

DOI: 10.17222/mit.2025.1596 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materiali in tehnologije, online erschienen am 09.04.2026. Verfasst von Rajakrishnamoorthy P. und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effective control of nitrogen oxides (NOx) from gasoline engines remains a critical challenge for sustainable emission management, as conventional three-way catalytic converters (TWCs) exhibit limited NOx conversion efficiency under oxygen-rich exhaust conditions. This study presents the development and evaluation of metal-doped zeolite-based catalysts – Cu-ZSM-5 and Fe-ZSM-5 – coated onto ceramic foam substrates as advanced alternatives to conventional noble-metal honeycomb monoliths. The catalysts were synthesized via ion-exchange methods and characterized using XRF, SEM, and XRD to confirm successful metal incorporation without compromising the zeolite’s MFI crystalline framework. Engine tests were conducted on a twin-cylinder, 624 cm³ spark ignition engine to compare the catalytic performance of the laboratory-fabricated converters with a commercial TWC. Results demonstrated superior NOx reduction efficiencies of 71 % and 76 % for Cu- and Fe-doped zeolite converters, respectively, at maximum load conditions. Fe-ZSM-5 exhibited enhanced high-temperature NOx conversion (up to 79 %), whereas Cu-ZSM-5 showed better low-temperature activity. Both catalysts also achieved higher CO (up to 89 %) and HC (up to 95 %) conversion efficiencies compared to the commercial system. Although a minor decrease in brake thermal efficiency was observed due to the increased backpressure of the ceramic foam substrate, the overall performance indicates that metal-doped zeolite-coated ceramic converters provide a cost-effective, thermally stable, and environmentally sustainable alternative to noble-metal TWCs. This work advances the practical application of zeolite-based catalysts for next-generation automotive emission control systems.

Zitieren

APA

P., R., Bakkiyaraj, N., Premkumar, P., & Muthuvelu, P. (2026). DEVELOPMENT OF Cu- AND Fe-DOPED ZEOLITE-COATED CERAMIC FOAMS AS FUNCTIONAL CATALYSTS FOR AUTOMOTIVE NOx REDUCTION. Materiali in tehnologije, 60(2). https://doi.org/10.17222/mit.2025.1596

Vancouver

P. R, Bakkiyaraj N, Premkumar P, Muthuvelu P. DEVELOPMENT OF Cu- AND Fe-DOPED ZEOLITE-COATED CERAMIC FOAMS AS FUNCTIONAL CATALYSTS FOR AUTOMOTIVE NOx REDUCTION. Materiali in tehnologije. 2026;60(2). doi:10.17222/mit.2025.1596

BibTeX
@article{P2026,
  author = {P., Rajakrishnamoorthy and Bakkiyaraj, N. and Premkumar, P. and Muthuvelu, Premnath},
  title = {DEVELOPMENT OF Cu- AND Fe-DOPED ZEOLITE-COATED CERAMIC FOAMS AS FUNCTIONAL CATALYSTS FOR AUTOMOTIVE NOx REDUCTION},
  journal = {Materiali in tehnologije},
  year = {2026},
  volume = {60},
  number = {2},
  doi = {10.17222/mit.2025.1596}
}
Kostenlos starten →