EFFECTS OF LASER POWER, SCAN SPEED AND HEAT TREATMENT ON MICROSTRUCTURE AND HARDNESS OF PBF-LB INCONEL 718
Materiali in tehnologije · 08.04.2026 · 60 (2)
DOI: 10.17222/mit.2025.1581 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materiali in tehnologije, online erschienen am 08.04.2026. Verfasst von Ahmed Abdelghany und 4 weiteren Autor:innen.
Abstract (Originalsprache)
This study quantifies the effects of laser power and scan speed on the aged microstructure and hardness of PBF-LB Inconel 718 processed under the EOS-standard heat-treatment schedule. Cylindrical specimens were fabricated on an EOS M290 using six power–speed combinations spanning a line energy (Eline = P/v) range of 0.167–0.583 J·mm–1, followed by solution annealing and double ageing according to the EOS recommendation. Microstructure was assessed by EBSD, and hardness was measured in both the as-built and aged conditions. EBSD revealed build-direction-aligned columnar grains under all conditions, while increasing line energy was associated with a progressively coarser boundary/subgrain network. The lowest line-energy (highest scan-speed) condition (200 W/1200 mm·s–1; 0.167 J·mm–1) achieved the highest post-age hardness (459 HV5), whereas the highest line-energy condition (350 W/600 mm·s–1; 0.583 J·mm–1) exhibited the lowest hardness (438 HV5) together with void-like, non-indexed features consistent with porosity. Overall, the results provide a compact process–structure–property map and energy-aware guidance for selecting PBF-LB Inconel 718 parameter windows, highlighting that while lower line-energy conditions maximise performance, higher-speed regimes may still deliver sufficient quality for short-life or productivity-driven components.
Zitieren
APA
Abdelghany, A., Jaskari, M., Westman, S., Poutiainen, I., & Järvenpää, A. (2026). EFFECTS OF LASER POWER, SCAN SPEED AND HEAT TREATMENT ON MICROSTRUCTURE AND HARDNESS OF PBF-LB INCONEL 718. Materiali in tehnologije, 60(2). https://doi.org/10.17222/mit.2025.1581
Vancouver
Abdelghany A, Jaskari M, Westman S, Poutiainen I, Järvenpää A. EFFECTS OF LASER POWER, SCAN SPEED AND HEAT TREATMENT ON MICROSTRUCTURE AND HARDNESS OF PBF-LB INCONEL 718. Materiali in tehnologije. 2026;60(2). doi:10.17222/mit.2025.1581
BibTeX
@article{Abdelghany2026,
author = {Abdelghany, Ahmed and Jaskari, Matias and Westman, Sami and Poutiainen, Ilkka and Järvenpää, Antti},
title = {EFFECTS OF LASER POWER, SCAN SPEED AND HEAT TREATMENT ON MICROSTRUCTURE AND HARDNESS OF PBF-LB INCONEL 718},
journal = {Materiali in tehnologije},
year = {2026},
volume = {60},
number = {2},
doi = {10.17222/mit.2025.1581}
}
EUVIMED