MICRO VICKERS HARDNESS AND SURFACE ROUGHNESS OF Al-Cu UNS A92124/T851 ALLOY IN RELATION TO TURNING PARAMETERS: AN EXPERIMENTAL STUDY
Materiali in tehnologije · 08.06.2026 · 60 (3)
DOI: 10.17222/mit.2025.1510 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materiali in tehnologije, online erschienen am 08.06.2026. Verfasst von Vellingiri Sakthivel und 3 weiteren Autor:innen.
Abstract (Originalsprache)
This study examines the effect of cutting speed and feed rate on the surface roughness and microhardness of UNS A92124-785 during CNC turning. The machined surfaces were evaluated in terms of surface roughness, microhardness, and corrosion behavior, while surface morphology and elemental characteristics were analyzed using SEM coupled with EDX. The results indicated that surface roughness (Rz) increased mainly with feed rate and showed moderate dependence on cutting velocity, with further deterioration observed after corrosion due to increased surface irregularities. Microhardness measurements revealed minimal variation with machining parameters before corrosion. However, a noticeable reduction in Vickers microhardness (VH) was observed after corrosion, suggesting surface softening. Overall, the findings highlight feed rate as the dominant factor influencing surface quality and demonstrate that corrosion adversely affects both surface integrity and hardness of the machined material.
Zitieren
APA
Sakthivel, V., G., S. V., A., A., & S., S. (2026). MICRO VICKERS HARDNESS AND SURFACE ROUGHNESS OF Al-Cu UNS A92124/T851 ALLOY IN RELATION TO TURNING PARAMETERS: AN EXPERIMENTAL STUDY. Materiali in tehnologije, 60(3). https://doi.org/10.17222/mit.2025.1510
Vancouver
Sakthivel V, G. SV, A. A, S. S. MICRO VICKERS HARDNESS AND SURFACE ROUGHNESS OF Al-Cu UNS A92124/T851 ALLOY IN RELATION TO TURNING PARAMETERS: AN EXPERIMENTAL STUDY. Materiali in tehnologije. 2026;60(3). doi:10.17222/mit.2025.1510
BibTeX
@article{Sakthivel2026,
author = {Sakthivel, Vellingiri and G., Sundara Vadivel and A., Arunkumar and S., Sivamani},
title = {MICRO VICKERS HARDNESS AND SURFACE ROUGHNESS OF Al-Cu UNS A92124/T851 ALLOY IN RELATION TO TURNING PARAMETERS: AN EXPERIMENTAL STUDY},
journal = {Materiali in tehnologije},
year = {2026},
volume = {60},
number = {3},
doi = {10.17222/mit.2025.1510}
}
EUVIMED