One-step electrodeposition of cerium stearate on AAO to improve the corrosion resistance
Surface Innovations · 29.06.2026 · 14 (4) · 178-193
DOI: 10.1680/jsuin.25.00100 ↗Kurz gefasst
Fachartikel in der Zeitschrift Surface Innovations, online erschienen am 02.06.2026. Verfasst von Zhelun Mai und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: Guangdong Basic and Applied Basic Research Foundation, National Natural Science Foundation of China, Innovation Team Project for Colleges and Universities of Guangdong Province.
Abstract (Originalsprache)
To enhance the corrosion resistance of anodic aluminum oxide (AAO) films, this study employed a one-step electrodeposition strategy to seal and hydrophobically modify the AAO pores with cerium stearate, achieving a hydrophobic composite coating. The influence of key deposition parameters on the coating’s morphology, composition, and corrosion resistance was systematically examined using scanning electron microscopy, water contact angle (WCA) analysis, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and electrochemical characterization. The results confirm the formation of a dense cerium stearate coating comprising an outer Ce(CH3(CH2)16COO)3 layer and an inner Ce(CH3(CH2)16COO)4 layer, which completely seals the surface pores and markedly improves the substrate’s corrosion resistance. Single-factor experiments identified the optimal processing conditions as: 50 V deposition voltage, 10 min deposition time, and 25°C deposition temperature. The coating prepared under these conditions displays a dense micro-nano structure, outstanding hydrophobicity (WCA ≈ 145°), and superior anticorrosion properties. In 3.5 wt.% NaCl solution, the optimal coating exhibits a remarkably low corrosion current density of 1.95 × 10−10 A·cm−2 – two orders of magnitude lower than unsealed AAO – while its charge transfer resistance reaches 3.36 × 108 Ω·cm2, an enhancement of approximately three orders of magnitude. With a protection efficiency of 99.79%, the coating demonstrates exceptional corrosion protection performance.
Förderung
- Guangdong Basic and Applied Basic Research Foundation
- National Natural Science Foundation of China
- Innovation Team Project for Colleges and Universities of Guangdong Province
Zitieren
APA
Mai, Z., Zhu, Q., Guan, Y., Fang, X., Du, X., & Chen, D. (2026). One-step electrodeposition of cerium stearate on AAO to improve the corrosion resistance. Surface Innovations, 14(4), 178-193. https://doi.org/10.1680/jsuin.25.00100
Vancouver
Mai Z, Zhu Q, Guan Y, Fang X, Du X, Chen D. One-step electrodeposition of cerium stearate on AAO to improve the corrosion resistance. Surface Innovations. 2026;14(4):178-193. doi:10.1680/jsuin.25.00100
BibTeX
@article{Mai2026,
author = {Mai, Zhelun and Zhu, Qianyi and Guan, Yingjian and Fang, Xuming and Du, Xiaoqing and Chen, Dongchu},
title = {One-step electrodeposition of cerium stearate on AAO to improve the corrosion resistance},
journal = {Surface Innovations},
year = {2026},
volume = {14},
number = {4},
pages = {178--193},
doi = {10.1680/jsuin.25.00100}
}
EUVIMED