Corrosion behavior of MoS 2 -incorporated PEO coatings prepared on Al alloy
Surface Innovations · 01.10.2020 · 8 (5) · 252-262
DOI: 10.1680/jsuin.19.00065 ↗Kurz gefasst
Fachartikel in der Zeitschrift Surface Innovations, erschienen am 01.10.2020. Verfasst von Babak Ghorbanian und 3 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 46 Literaturangaben.
Abstract (Originalsprache)
Aluminum (Al) alloys are used widely in the automotive and aerospace industries, but their corrosion resistance is insufficient in long-term service, particularly in a high-salinity environment. The incorporation of molybdenum disulfide (MoS 2 ) particles into plasma electrolytic oxidation (PEO) coatings formed on an aluminum alloy was investigated in this work. After oxidation, the coatings were investigated by a series of structural, morphological and electrochemical corrosion tests to understand the effect of molybdenum disulfide addition to the base electrolyte. The phase compositions and surface morphology of coatings were analyzed through X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM), respectively. The XRD results showed that all coatings were primarily composed of α-aluminum oxide (α-Al 2 O 3 ), γ-aluminum oxide and molybdenum disulfide phases. The FESEM observations indicated that molybdenum disulfide particles were successfully incorporated in the ceramic coating and the apparent porosities decreased with increasing molybdenum disulfide concentration. The electrochemical corrosion tests indicated that the amount of coating porosity decreased and the corrosion current density decreased from 79·6 μA/cm 2 in the bare aluminum alloy to 58·1 and 30·1 μA/cm 2 in the PEO coatings without and with the molybdenum disulfide additive, respectively. This behavior could be attributed to the beneficial effect of the molybdenum disulfide particles, which might play an important role in blocking micropores and microcracks.
Zitieren
APA
Ghorbanian, B., Tajally, M., Khoie, S. M. M., & Tavakoli, H. (2020). Corrosion behavior of MoS 2 -incorporated PEO coatings prepared on Al alloy. Surface Innovations, 8(5), 252-262. https://doi.org/10.1680/jsuin.19.00065
Vancouver
Ghorbanian B, Tajally M, Khoie SMM, Tavakoli H. Corrosion behavior of MoS 2 -incorporated PEO coatings prepared on Al alloy. Surface Innovations. 2020;8(5):252-262. doi:10.1680/jsuin.19.00065
BibTeX
@article{Ghorbanian2020,
author = {Ghorbanian, Babak and Tajally, Mohammad and Khoie, Seyed Mohammad Mousavi and Tavakoli, Hossein},
title = {Corrosion behavior of MoS 2 -incorporated PEO coatings prepared on Al alloy},
journal = {Surface Innovations},
year = {2020},
volume = {8},
number = {5},
pages = {252--262},
doi = {10.1680/jsuin.19.00065}
}
EUVIMED