Bolted timber joints with corrugated versus flat steel plates and CFRP reinforcement
Proceedings of the Institution of Civil Engineers - Structures and Buildings · 05.08.2026 · 179 (7) · 775-787
DOI: 10.1680/jstbu.25.00142 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Civil Engineers - Structures and Buildings, online erschienen am 05.06.2026. Verfasst von Xuan Guo und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: Science and Technology Project of Guangzhou Construction Group Co..
Abstract (Originalsprache)
In this study, the mechanical behaviour of bolted timber joints with slotted-in steel plates was investigated experimentally, comparing flat plates with innovative corrugated plates, both with and without carbon fibre-reinforced polymer (CFRP) reinforcement. Thirty-two specimen sets (16 corrugated, 16 flat) were tested under monotonic loading parallel to the grain using an orthogonal design. Results showed that corrugated-plate joints exhibited distinct failure modes including shear, compression and transverse–longitudinal (TL) cleavage, with combined bolt yield deformations. Their load–displacement curves lacked a clear yield plateau, progressing through elastic, fracture-transition and failure stages. Corrugated configurations demonstrated superior stiffness and bearing capacity compared to flat-plate joints. U-shaped CFRP reinforcement significantly enhanced corrugated-plate joint performance, an effect absent in flat-plate joints. Theoretical analysis based on the Eurocode revealed that current formulas are applicable to flat-plate joints but overlook end-region mechanics in corrugated-plate joints. A simplified empirical method incorporating timber end characteristics and error analysis was proposed. However, mechanical aspects such as TL fracture effects require further investigation.
Förderung
- Science and Technology Project of Guangzhou Construction Group Co.
Zitieren
APA
Guo, X., Zhang, Z., Yu, Z., Tian, S., Wu, B., Xu, Z., & Hu, Y. (2026). Bolted timber joints with corrugated versus flat steel plates and CFRP reinforcement. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 179(7), 775-787. https://doi.org/10.1680/jstbu.25.00142
Vancouver
Guo X, Zhang Z, Yu Z, Tian S, Wu B, Xu Z, et al. Bolted timber joints with corrugated versus flat steel plates and CFRP reinforcement. Proceedings of the Institution of Civil Engineers - Structures and Buildings. 2026;179(7):775-787. doi:10.1680/jstbu.25.00142
BibTeX
@article{Guo2026,
author = {Guo, Xuan and Zhang, Zhanfeng and Yu, Zhiwei and Tian, Shiyu and Wu, Bengang and Xu, Zhonggen and Hu, Yongqi},
title = {Bolted timber joints with corrugated versus flat steel plates and CFRP reinforcement},
journal = {Proceedings of the Institution of Civil Engineers - Structures and Buildings},
year = {2026},
volume = {179},
number = {7},
pages = {775--787},
doi = {10.1680/jstbu.25.00142}
}
EUVIMED