EUVIMEDEUVIMED entdecken
Crossref

Finite element analysis of alternative load paths in a platform-framed CLT building

Johannes A. J. Huber, Mats Ekevad, Ulf Arne Girhammar, Sven Berg

Proceedings of the Institution of Civil Engineers - Structures and Buildings · 2020-05 · 173 (5) · 379-390

DOI: 10.1680/jstbu.19.00136 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Civil Engineers - Structures and Buildings, 2020-05. Verfasst von Johannes A. J. Huber und 3 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multi-storey cross-laminated timber (CLT) buildings are a comparatively recent construction type. Knowledge concerning the performance of CLT buildings regarding the prevention of disproportionate collapse after unforeseeable events (e.g. accidents or acts of terrorism) is not as refined as that for concrete and steel buildings. In particular, alternative load paths (ALPs) after the removal of a wall panel in platform-framed variants have not yet been studied in detail. The goal of this work was therefore to study ALPs in CLT buildings. An eight-storey bay of an existing building was evaluated by conducting a non-linear static pushdown analysis in a finite element analysis on three representative storeys. The analyses accounted for single fastener behaviour, timber crushing, friction, brittle failure and large deformations. The force–deformation behaviours elicited under the pushdown analyses were subsequently inserted in a simplified dynamic model to evaluate the transient response of the entire bay. Four ALPs were identified in this case – shear resistance in the floor panels, arching action of the walls, catenary action in the floor panels and hanging action from the roof. The dynamic analysis did not show a collapse, unless the inter-compartment stiffness was significantly reduced. The resistance mechanisms are described in this paper, which may provide information for improved building design.

Zitieren

APA

Huber, J. A. J., Ekevad, M., Girhammar, U. A., & Berg, S. (2020). Finite element analysis of alternative load paths in a platform-framed CLT building. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 173(5), 379-390. https://doi.org/10.1680/jstbu.19.00136

Vancouver

Huber JAJ, Ekevad M, Girhammar UA, Berg S. Finite element analysis of alternative load paths in a platform-framed CLT building. Proceedings of the Institution of Civil Engineers - Structures and Buildings. 2020;173(5):379-390. doi:10.1680/jstbu.19.00136

BibTeX
@article{Huber2020,
  author = {Huber, Johannes A. J. and Ekevad, Mats and Girhammar, Ulf Arne and Berg, Sven},
  title = {Finite element analysis of alternative load paths in a platform-framed CLT building},
  journal = {Proceedings of the Institution of Civil Engineers - Structures and Buildings},
  year = {2020},
  volume = {173},
  number = {5},
  pages = {379--390},
  doi = {10.1680/jstbu.19.00136}
}
Kostenlos starten →