EUVIMEDEUVIMED entdecken
Crossref

Centrifuge model test on soil slopes reinforced with micropile–anchor composite structure

Xiangzhen Qin, Jianfeng Chen, Ning Bao, Ming Peng, Hui Qi

International Journal of Physical Modelling in Geotechnics · 18.05.2026 · 26 (3) · 136-152

DOI: 10.1680/jphmg.25.00045 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Physical Modelling in Geotechnics, online erschienen am 17.03.2026. Verfasst von Xiangzhen Qin und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Micropile–anchor composite structures (MACSs) are effective in slope stabilisation by combining the active resistance of anchor cables with the passive reinforcement of micropiles. However, the reinforcement mechanism of MACS under prototype conditions remains unclear, as existing studies have focused on small-scale 1-g model tests. This study conducted three centrifuge model tests on soil slopes reinforced with double-row micropiles and double/single-row MACS, respectively, based on a highway slope in Shandong, China. The development of earth pressure, pile bending moment, anchor axial force, and slope deformation was systematically analysed, and crack propagation and failure characteristics were examined. The results demonstrate that MACS significantly improve slope performance by reducing earth pressure and restricting deformation. Lateral earth pressure is redistributed between front and rear micropile rows, and load sharing is affected by reinforcement configuration. Anchor cables enhance the plastic deformation capacity of slopes and inhibit surface crack growth, while double-row micropiles obstruct sliding surface coalescence. Furthermore, micropiles row influence slope deformation at the failure stage, with double-row MACS-reinforced slopes remaining stable with minor surface cracks, whereas single-row MACS-reinforced slopes fail as crushed blocks along a circular sliding surface initiated by main cracks. These findings contribute to understanding the reinforcement mechanism of MACS.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Qin, X., Chen, J., Bao, N., Peng, M., & Qi, H. (2026). Centrifuge model test on soil slopes reinforced with micropile–anchor composite structure. International Journal of Physical Modelling in Geotechnics, 26(3), 136-152. https://doi.org/10.1680/jphmg.25.00045

Vancouver

Qin X, Chen J, Bao N, Peng M, Qi H. Centrifuge model test on soil slopes reinforced with micropile–anchor composite structure. International Journal of Physical Modelling in Geotechnics. 2026;26(3):136-152. doi:10.1680/jphmg.25.00045

BibTeX
@article{Qin2026,
  author = {Qin, Xiangzhen and Chen, Jianfeng and Bao, Ning and Peng, Ming and Qi, Hui},
  title = {Centrifuge model test on soil slopes reinforced with micropile–anchor composite structure},
  journal = {International Journal of Physical Modelling in Geotechnics},
  year = {2026},
  volume = {26},
  number = {3},
  pages = {136--152},
  doi = {10.1680/jphmg.25.00045}
}
Kostenlos starten →