Parameter screening of FTO etching and Cu/NiO layers for Cu2O PEC performance
Nanomaterials and Energy · 02.04.2026 · 15 (1) · 34-44
DOI: 10.1680/jnaen.24.00052 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials and Energy, online erschienen am 23.03.2026. Verfasst von Nur Azlina Adris und 6 weiteren Autor:innen. Die Arbeit nennt 63 Literaturangaben. Gefördert von: Universiti Kebangsaan Malaysia.
Abstract (Originalsprache)
Efficient utilisation of solar energy is crucial for sustainable power generation, with photoelectrochemical (PEC) water splitting being a promising approach. Cuprous oxide (Cu2O) is particularly attractive to be utilised as photoelectrodes because of their high efficiency and low cost in relation to other materials despite their poor photostability. Therefore, a novel strategy of protected cuprous oxide photocathode with copper (Cu) underlayer and substrate modification was presented in this preliminary study. The fluorine-doped tin oxide (FTO) substrate etching and copper underlayer will enhance the performance of the cuprous oxide photocathode, while the protected nickel oxide (NiO) layer will improve its stability in the electrolyte. The two-level factorial design was utilised to measure and analyse the effects of FTO etching time, copper electrodeposition (ED) voltage, copper and cuprous oxide ED time, cuprous oxide reduction cycle, nickel ED time, and annealing temperature and time on the photocatalytic activity. The morphological, elemental composition and PEC features of the samples are characterised using field emission scanning electron microscopy and a current–voltage monitoring system. Under 100 mW/cm2 of simulated sunlight, the photoelectrode exhibits a maximum current density of −54.53 × 10−2 mA/cm2 at 0 VRHE.
Förderung
- Universiti Kebangsaan Malaysia
Zitieren
APA
Adris, N. A., Minggu, L. J., Yunus, R. M., Arifin, K., Mohamed, M. A., Abidin, A. F. Z., & Kassim, M. B. (2026). Parameter screening of FTO etching and Cu/NiO layers for Cu2O PEC performance. Nanomaterials and Energy, 15(1), 34-44. https://doi.org/10.1680/jnaen.24.00052
Vancouver
Adris NA, Minggu LJ, Yunus RM, Arifin K, Mohamed MA, Abidin AFZ, et al. Parameter screening of FTO etching and Cu/NiO layers for Cu2O PEC performance. Nanomaterials and Energy. 2026;15(1):34-44. doi:10.1680/jnaen.24.00052
BibTeX
@article{Adris2026,
author = {Adris, Nur Azlina and Minggu, Lorna Jeffery and Yunus, Rozan Mohamad and Arifin, Khuzaimah and Mohamed, Muhamad Azuwa and Abidin, Azim Fitri Zainul and Kassim, Mohammad B.},
title = {Parameter screening of FTO etching and Cu/NiO layers for Cu2O PEC performance},
journal = {Nanomaterials and Energy},
year = {2026},
volume = {15},
number = {1},
pages = {34--44},
doi = {10.1680/jnaen.24.00052}
}
EUVIMED