Influence of initial ambient curing on reaction products and strength development in fly ash–silica fume geopolymers
Magazine of Concrete Research · 24.11.2026 · 1-18
DOI: 10.1680/jmacr.26.00417 ↗Kurz gefasst
Fachartikel in der Zeitschrift Magazine of Concrete Research, online erschienen am 24.11.2026. Verfasst von Kailash Kumar Singaram und 2 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben.
Abstract (Originalsprache)
Geopolymers blended with silica fume (SF) offer enhanced performance, but the influence of the curing sequence on their properties remains unexplored. This study examines, for the first time, the impact of ambient curing (AC) prior to heat curing (HC) on the strength and reaction products of geopolymer mortars (GPMs) based on SF and fly ash (FA), highlighting their process–structure–property relationships. The initial AC periods were 0–48 h, while HC was conducted at 60°C for 48 h and 100°C for 24 h. Under optimal curing conditions, GPM30 with 5% SF achieved a compressive strength of 54 MPa after initial AC for 48 h and HC at 100°C for 24 h. This was an increase of 42% over GPM26 (5% SF), which reached only 37 MPa after direct HC for 24 h, highlighting the benefit of initial AC. X-ray diffraction and Rietveld analysis confirmed the presence of additional crystalline phases of albite, aragonite and anorthite minerals, indicating the formation of a stable, dense geopolymer matrix under optimal curing conditions. The retention of moisture, as indicated by Fourier transform infrared spectroscopy and attributed to the presence of SF, increased the curing efficiency. The results of this work highlight the correlation between curing, aluminosilicate structure and compressive strength, offering insights into optimising curing conditions for SF-blended FA-based geopolymers.
Zitieren
APA
Singaram, K. K., Khan, M. A., & Talakokula, V. (2026). Influence of initial ambient curing on reaction products and strength development in fly ash–silica fume geopolymers. Magazine of Concrete Research, 1-18. https://doi.org/10.1680/jmacr.26.00417
Vancouver
Singaram KK, Khan MA, Talakokula V. Influence of initial ambient curing on reaction products and strength development in fly ash–silica fume geopolymers. Magazine of Concrete Research. 2026:1-18. doi:10.1680/jmacr.26.00417
BibTeX
@article{Singaram2026,
author = {Singaram, Kailash Kumar and Khan, Mohd Ataullah and Talakokula, Visalakshi},
title = {Influence of initial ambient curing on reaction products and strength development in fly ash–silica fume geopolymers},
journal = {Magazine of Concrete Research},
year = {2026},
pages = {1--18},
doi = {10.1680/jmacr.26.00417}
}
EUVIMED