Surface quality of steam-cured concrete with defoamer-modified mould release agents
Magazine of Concrete Research · 05.11.2026 · 78 (21-22) · 1422-1435
DOI: 10.1680/jmacr.26.00304 ↗Kurz gefasst
Fachartikel in der Zeitschrift Magazine of Concrete Research, online erschienen am 07.09.2026. Verfasst von Yanyan Hu und 3 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben.
Abstract (Originalsprache)
Steam curing is widely used for precast concrete, but mixtures containing polycarboxylate ether superplasticiser often develop surface bugholes and coarser pores near the mould-contact region. This study examined whether a water-based mould release agent (MRA) modified with a defoamer based on mineral oil (ODA) or a polyol-based defoamer (ADA) could improve the surface quality of steam-cured concrete. Concrete compressive strength, demoulded surface appearance and rebound-based near-surface uniformity were assessed. Steam-cured mortar was used to compare image-based pore characteristics in the mould-contact region and the interior. The image-based pore-structure response was more evident in the mould-contact near-surface region than in the interior. Compared with the blank group, ADA-6 (0.6% defoamer by mass of the MRA) increased the demoulded and 28-day compressive strengths by 21.84% and 10.13%, respectively, whereas ADA-9 (0.9% defoamer) gave the greatest near-surface pore refinement, reducing the mean pore diameter from 0.67 mm to 0.26 mm and the porosity from 6.58% to 1.63%. ODA was more dosage-sensitive, and complete replacement of the MRA reduced the 28-day strength by 15.70%. The results indicate that defoamer-modified water-based MRAs can improve demoulded surface quality, but strength and surface pore refinement should be optimised separately.
Zitieren
APA
Hu, Y., Zhai, C., Xiong, Q., & Tang, L. (2026). Surface quality of steam-cured concrete with defoamer-modified mould release agents. Magazine of Concrete Research, 78(21-22), 1422-1435. https://doi.org/10.1680/jmacr.26.00304
Vancouver
Hu Y, Zhai C, Xiong Q, Tang L. Surface quality of steam-cured concrete with defoamer-modified mould release agents. Magazine of Concrete Research. 2026;78(21-22):1422-1435. doi:10.1680/jmacr.26.00304
BibTeX
@article{Hu2026,
author = {Hu, Yanyan and Zhai, Chenyang and Xiong, Qian and Tang, Liang},
title = {Surface quality of steam-cured concrete with defoamer-modified mould release agents},
journal = {Magazine of Concrete Research},
year = {2026},
volume = {78},
number = {21-22},
pages = {1422--1435},
doi = {10.1680/jmacr.26.00304}
}
EUVIMED