EUVIMEDEUVIMED entdecken
Crossref

Thermo-mechanical performance of concrete incorporating different walnut shell aggregate gradations and rubber fibres under elevated temperatures

Sumedh Limaye, Abhishek Rajput

Magazine of Concrete Research · 17.11.2026 · 1-18

DOI: 10.1680/jmacr.26.00287 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Magazine of Concrete Research, online erschienen am 17.11.2026. Verfasst von Sumedh Limaye und 1 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite growing interest in agricultural waste shell materials as a sustainable alternative to natural coarse aggregate, the combined influence of walnut shell aggregate (WSA) particle-size gradation (PSG), replacement level and waste tyre rubber fibres (RuF) on the performance of concrete after exposure to elevated temperatures remains largely unexplored. In this study, along with a control mix, 24 concrete mixtures incorporating coarse-sized WSA (WC) and medium-sized WSA (WM) at replacement levels of 5–30%, with and without 2.5% RuF, were investigated. The mechanical, stress–strain, durability and microstructural properties of the concretes after exposure to temperatures up to 400°C were evaluated. The results showed that the performance of WSA concrete (WSAC) was strongly influenced by the PSG, with WM mixtures generally exhibiting higher compressive strength and better residual performance than the corresponding WC mixtures. The incorporation of RuF reduced brittleness and improved the residual mechanical performance of the WSAC after thermal exposure. Strong correlations were observed between compressive strength and density (R2 = 0.880) and between compressive strength and water penetration depth (R2 = 0.946), highlighting the influence of density and permeability on concrete performance. Among all the mixtures, the concrete containing 10–15% WM with 2.5% RuF provided the best balance between reduced density and residual mechanical performance, retaining approximately 60–72% of its original compressive strength after exposure to 400°C. These findings indicate the importance of WSA PSG and RuF incorporation in developing lower-density concrete with improved residual performance after moderate thermal exposure.

Zitieren

APA

Limaye, S., & Rajput, A. (2026). Thermo-mechanical performance of concrete incorporating different walnut shell aggregate gradations and rubber fibres under elevated temperatures. Magazine of Concrete Research, 1-18. https://doi.org/10.1680/jmacr.26.00287

Vancouver

Limaye S, Rajput A. Thermo-mechanical performance of concrete incorporating different walnut shell aggregate gradations and rubber fibres under elevated temperatures. Magazine of Concrete Research. 2026:1-18. doi:10.1680/jmacr.26.00287

BibTeX
@article{Limaye2026,
  author = {Limaye, Sumedh and Rajput, Abhishek},
  title = {Thermo-mechanical performance of concrete incorporating different walnut shell aggregate gradations and rubber fibres under elevated temperatures},
  journal = {Magazine of Concrete Research},
  year = {2026},
  pages = {1--18},
  doi = {10.1680/jmacr.26.00287}
}
Kostenlos starten →