EUVIMEDEUVIMED entdecken
Crossref

Low-pressure selective adsorption of CO2 and CH4 on carbon-based materials

Zaineb Beji, Wahid Djeridi, Wrida Ahmed, Youssef Habibi, O. Mohamed Lemine, Lassaad El Mir, Sami Guiza

Green Materials · 01.07.2026 · 1-12

DOI: 10.1680/jgrma.26.00029 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Green Materials, online erschienen am 01.07.2026. Verfasst von Zaineb Beji und 6 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Gefördert von: Tunisian Ministry of Higher Education and Scientific Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing demand for sustainable technologies to mitigate greenhouse gas emissions has intensified research on efficient adsorbent materials for carbon dioxide and methane capture. In this work, three carbon-based materials, phenol formaldehyde xerogels, nickel-modified xerogels, and activated carbons derived from olive stones, were synthesized and systematically compared in terms of textural, structural, and adsorption properties. Comprehensive characterization revealed that both the pyrolysis temperature and nickel incorporation strongly influence porosity and surface functionality. Adsorption experiments demonstrated that activated carbon based on olive stones exhibits the highest total uptake for both gases, reaching 6.41 mmol/g for carbon dioxide and 2.75 mmol/g for methane compared to 4.41 and 2.79 mmol/g for phenol formaldehyde xerogels. In comparison, nickel-modified xerogels present an adsorption capacity of around 1.34 and 0.65 mmol/g, respectively, for carbon dioxide and methane under the same conditions. These results due to the large surface area and dominant microporosity of biomass-based samples. In contrast, the nickel-decorated sample shows superior surface-normalized adsorption efficiency, particularly at low pressures where surface interactions prevail. The presence of nickel introduced electroactive sites that enhanced carbon dioxide affinity by way of quadrupolar interactions and improved methane adsorption through localized polarization effects. These findings highlight that surface chemistry plays a more decisive role than textural parameters in determining selectivity and adsorption performance under realistic conditions. Overall, this study establishes a rational design strategy for next-generation carbon adsorbents combining engineered porosity and functionalized surfaces, paving the way for energy-efficient carbon dioxide and methane separation processes.

Förderung

  • Tunisian Ministry of Higher Education and Scientific Research

Zitieren

APA

Beji, Z., Djeridi, W., Ahmed, W., Habibi, Y., Lemine, O. M., Mir, L. E., & Guiza, S. (2026). Low-pressure selective adsorption of CO2 and CH4 on carbon-based materials. Green Materials, 1-12. https://doi.org/10.1680/jgrma.26.00029

Vancouver

Beji Z, Djeridi W, Ahmed W, Habibi Y, Lemine OM, Mir LE, et al. Low-pressure selective adsorption of CO2 and CH4 on carbon-based materials. Green Materials. 2026:1-12. doi:10.1680/jgrma.26.00029

BibTeX
@article{Beji2026,
  author = {Beji, Zaineb and Djeridi, Wahid and Ahmed, Wrida and Habibi, Youssef and Lemine, O. Mohamed and Mir, Lassaad El and Guiza, Sami},
  title = {Low-pressure selective adsorption of CO2 and CH4 on carbon-based materials},
  journal = {Green Materials},
  year = {2026},
  pages = {1--12},
  doi = {10.1680/jgrma.26.00029}
}
Kostenlos starten →