EUVIMEDEUVIMED entdecken
Crossref

Synthesis and mechanical properties of glass fiber–reinforced polymer based on waste cooking oil

Yang Yang, Weiting Li, Chuanyang Tang, Guangzhi Qin, Fangping Shen, Minghui Li, Mengyao Wu, Haitian Jiang, Shuoping Chen

Green Materials · 17.03.2026 · 1-15

DOI: 10.1680/jgrma.25.00168 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Green Materials, online erschienen am 17.03.2026. Verfasst von Yang Yang und 8 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Gefördert von: Guangxi Science and Technology Plan Project, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Converting waste cooking oil (WCO) into high-value materials is challenging due to low profitability and technical barriers. This study first successfully turned WCO into low-cost, high-performance glass fiber–reinforced polymer (GFRP). Specifically, WCO was transformed into photocurable monomer epoxidized waste oil methyl acrylate (EWOMA) by way of epoxidation and ring-opening esterification. EWOMA was then blended with triisopropylsilyl methacrylate (TIPSMA) to formulate an ultraviolet (UV)-curable resin (designated as EWOMA–TIPSMA (ET)) for use as the GFRP matrix, with glass fiber (GF) fabric serving as the reinforcement. The WCO-based GF/ET composite was fabricated by way of a hand lay-up process using a resin-to-fiber mass ratio of 7:3 and was subsequently cured under 405 nm UV light to form the final GFRP. The optimized GF/ET composite, prepared with an ET resin at an EWOMA-to-TIPSMA mass ratio of 3:2, exhibited outstanding mechanical properties, including a tensile strength of 191.92 MPa, a flexural strength of 204.97 MPa, and an impact strength of 103.49 kJ/m2 – representing ∼12.5-, 6.3-, and 35-fold improvements over the neat resin, respectively. In addition, the composite showed low porosity (3.44%) and minimal water absorption (1.57%). This work provides a sustainable, scalable route to transform WCO into structurally competitive composites, combining resource efficiency with high performance for industrial applications.

Förderung

  • Guangxi Science and Technology Plan Project
  • National Natural Science Foundation of China

Zitieren

APA

Yang, Y., Li, W., Tang, C., Qin, G., Shen, F., Li, M., Wu, M., Jiang, H., & Chen, S. (2026). Synthesis and mechanical properties of glass fiber–reinforced polymer based on waste cooking oil. Green Materials, 1-15. https://doi.org/10.1680/jgrma.25.00168

Vancouver

Yang Y, Li W, Tang C, Qin G, Shen F, Li M, et al. Synthesis and mechanical properties of glass fiber–reinforced polymer based on waste cooking oil. Green Materials. 2026:1-15. doi:10.1680/jgrma.25.00168

BibTeX
@article{Yang2026,
  author = {Yang, Yang and Li, Weiting and Tang, Chuanyang and Qin, Guangzhi and Shen, Fangping and Li, Minghui and Wu, Mengyao and Jiang, Haitian and Chen, Shuoping},
  title = {Synthesis and mechanical properties of glass fiber–reinforced polymer based on waste cooking oil},
  journal = {Green Materials},
  year = {2026},
  pages = {1--15},
  doi = {10.1680/jgrma.25.00168}
}
Kostenlos starten →