EUVIMEDEUVIMED entdecken
Crossref

Enabling mechanically adaptive 4D printing with cellulose nanocrystals

Tyler W Seguine, Jacob J Fallon, Arit Das, Emily A Holz, Mindy R Bracco, Justin E Yon, Earl Johan Foster, Michael J Bortner

Green Materials · 01.12.2021 · 9 (4) · 146-156

DOI: 10.1680/jgrma.20.00066 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Green Materials, erschienen am 01.12.2021. Verfasst von Tyler W Seguine und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 53 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing of stimulus-responsive materials is an area of four-dimensional (4D) printing that is continuing to gain interest. Cellulose nanocrystal (CNC) thermoplastic nanocomposites have been demonstrated as a water-responsive, mechanically adaptive material that shows promise in generating 4D-printed structures. In this study, a 10 wt% CNC thermoplastic polyurethane (TPU) nanocomposite was produced through a masterbatching process and printed using fused filament fabrication. A design of experiments was implemented to establish a processing window to highlight the effects of thermal energy input on the mechanical adaptivity of the printed parts. The combination of high temperatures and low speeds resulted in thermal energies that induced degradation of the CNC/TPU network and reduced the absolute values of storage moduli, but the mechanical adaptation persisted for all the printed samples. However, for slower speeds and increasing temperatures, the nanocomposites experienced a 15% decrease in adaptability. Further, a folded box structure was printed to establish the reversibility of the mechanical response and corresponding ability to generate a structure that can serve as a deployable shape-memory material based on response to water. The printed structure demonstrated fixity and recovery values of 76 and 42%, respectively. These results show significant promise for CNC/TPU nanocomposites in 4D-printed adaptable structures for academic and industrial applications.

Zitieren

APA

Seguine, T. W., Fallon, J. J., Das, A., Holz, E. A., Bracco, M. R., Yon, J. E., Foster, E. J., & Bortner, M. J. (2021). Enabling mechanically adaptive 4D printing with cellulose nanocrystals. Green Materials, 9(4), 146-156. https://doi.org/10.1680/jgrma.20.00066

Vancouver

Seguine TW, Fallon JJ, Das A, Holz EA, Bracco MR, Yon JE, et al. Enabling mechanically adaptive 4D printing with cellulose nanocrystals. Green Materials. 2021;9(4):146-156. doi:10.1680/jgrma.20.00066

BibTeX
@article{Seguine2021,
  author = {Seguine, Tyler W and Fallon, Jacob J and Das, Arit and Holz, Emily A and Bracco, Mindy R and Yon, Justin E and Foster, Earl Johan and Bortner, Michael J},
  title = {Enabling mechanically adaptive 4D printing with cellulose nanocrystals},
  journal = {Green Materials},
  year = {2021},
  volume = {9},
  number = {4},
  pages = {146--156},
  doi = {10.1680/jgrma.20.00066}
}
Kostenlos starten →