EUVIMEDEUVIMED entdecken
Crossref

Computational study of reservoir sand production mechanisms

Kenneth Imo-Imo Eshiet, Dongmin Yang, Yong Sheng

Geotechnical Research · 01.09.2019 · 6 (3) · 177-204

DOI: 10.1680/jgere.18.00026 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Geotechnical Research, erschienen am 01.09.2019. Verfasst von Kenneth Imo-Imo Eshiet und 2 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 65 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A numerical model is developed to simulate fluid flow conditions around a wellbore and to evaluate mechanisms governing fluid flow, pressure gradients, rock failure and the ensuing sand production. The rock material behaviour matches sandstone described by the Drucker–Prager material failure model. Conditions for erosion are governed through two criteria: a material failure criterion described by the Drucker–Prager model and a sanding criterion expressed by an eroded solid mass generation model. The interplay between controlling operating and reservoir conditions is assessed. In addition, contributions of the following key factors to interstitial fluid velocity, plastic strain, pore pressure variation and sand production are appraised: drawdown, wellbore perforation depth, mud pressure and erosion criteria. Despite a decrease in pore fluid velocity at the vicinity of the wellbore at increasing depth, sand production increases with wellbore/perforation depth. Likewise, at constant drawdown, sand production is aggravated as wellbore/perforation depth increases. The rate of increase in the plastic zone following the onset of sand production is inconstant. Furthermore, mud pressure is demonstrated as an effective tool for attenuating sand production. An understanding of interactions between key parameters governing reservoir responses and the effect on sanding during oil/gas production is imperative if extraction operations are to be optimised.

Zitieren

APA

Eshiet, K. I., Yang, D., & Sheng, Y. (2019). Computational study of reservoir sand production mechanisms. Geotechnical Research, 6(3), 177-204. https://doi.org/10.1680/jgere.18.00026

Vancouver

Eshiet KI, Yang D, Sheng Y. Computational study of reservoir sand production mechanisms. Geotechnical Research. 2019;6(3):177-204. doi:10.1680/jgere.18.00026

BibTeX
@article{Eshiet2019,
  author = {Eshiet, Kenneth Imo-Imo and Yang, Dongmin and Sheng, Yong},
  title = {Computational study of reservoir sand production mechanisms},
  journal = {Geotechnical Research},
  year = {2019},
  volume = {6},
  number = {3},
  pages = {177--204},
  doi = {10.1680/jgere.18.00026}
}
Kostenlos starten →