Small-strain shear modulus of silty sands: the role of sample preparation method
Géotechnique · 01.04.2024 · 74 (4) · 367-382
DOI: 10.1680/jgeot.23.00031 ↗Kurz gefasst
Fachartikel in der Zeitschrift Géotechnique, erschienen am 01.04.2024. Verfasst von Yutang Chen und 1 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 43 Literaturangaben.
Abstract (Originalsprache)
Establishing the influence of sample preparation method on shear wave velocity or associated small-strain shear modulus (G 0 ) of silty sands is a subject of considerable interest. This paper presents an attempt to address this topic through a comprehensive experimental programme covering four sample preparation methods. The experiments were conducted on clean Toyoura sand and its mixtures with two types of fines of different sizes. For each sample preparation method, a range of void ratio and confining stress was investigated to obtain a comprehensive view of the influence of sample preparation and its interplay with other factors. One of the notable findings is that, compared with clean sand, the difference of G 0 induced by different sample reconstitution methods can be much enlarged for silty sand, and the influence is coupled with the size disparity ratio of the mixtures. The reduction of G 0 due to the presence of fines also depends on sample preparation method and for smaller fines the reduction is more significant. A careful examination of the X-ray images of the specimens made by different methods suggests that the observed effects are mainly associated with the different contact conditions of coarse and fine grains.
Zitieren
APA
Chen, Y., & Yang, J. (2024). Small-strain shear modulus of silty sands: the role of sample preparation method. Géotechnique, 74(4), 367-382. https://doi.org/10.1680/jgeot.23.00031
Vancouver
Chen Y, Yang J. Small-strain shear modulus of silty sands: the role of sample preparation method. Géotechnique. 2024;74(4):367-382. doi:10.1680/jgeot.23.00031
BibTeX
@article{Chen2024,
author = {Chen, Yutang and Yang, Jun},
title = {Small-strain shear modulus of silty sands: the role of sample preparation method},
journal = {Géotechnique},
year = {2024},
volume = {74},
number = {4},
pages = {367--382},
doi = {10.1680/jgeot.23.00031}
}
EUVIMED