Effect of principal stress angle on the critical stress ratio of a silty sand tailings
Géotechnique Letters · 10.07.2026 · 1-6
DOI: 10.1680/jgele.25.00013 ↗Kurz gefasst
Fachartikel in der Zeitschrift Géotechnique Letters, online erschienen am 10.07.2026. Verfasst von A. C. Telles und 3 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben.
Abstract (Originalsprache)
A series of drained torsional shear hollow cylinder (HC) and triaxial compression (TC) tests were conducted on a silty sand iron ore tailings to investigate the effect of the principal stress angle on the critical stress ratio M. Two different combinations of principal stress angle α and intermediate principal stress ratio b were tested in the HC (α = 23° and b = 0·3 or α = 45° and b = 0·3) and then compared with the axisymmetric condition from the TC tests. The volumetric coupling parameter N (Nova’s flow rule) and the state-dilatancy coefficient χ were additionally estimated for each loading condition. The results showed that M is not unique for the same b, being also affected by α, which may be attributed to the effects of anisotropy. An increase in M of 9% was found when α was decreased from 45° to 23° while keeping the same b of 0·3. The results further show that χ does not depend on α when tested at a fixed value of b; however, it exhibits substantial variation relative to the TC condition when tested at b = 0·3.
Zitieren
APA
Telles, A. C., Reid, D., Fanni, R., & Fourie, A. (2026). Effect of principal stress angle on the critical stress ratio of a silty sand tailings. Géotechnique Letters, 1-6. https://doi.org/10.1680/jgele.25.00013
Vancouver
Telles AC, Reid D, Fanni R, Fourie A. Effect of principal stress angle on the critical stress ratio of a silty sand tailings. Géotechnique Letters. 2026:1-6. doi:10.1680/jgele.25.00013
BibTeX
@article{Telles2026,
author = {Telles, A. C. and Reid, D. and Fanni, R. and Fourie, A.},
title = {Effect of principal stress angle on the critical stress ratio of a silty sand tailings},
journal = {Géotechnique Letters},
year = {2026},
pages = {1--6},
doi = {10.1680/jgele.25.00013}
}
EUVIMED