EUVIMEDEUVIMED entdecken
Crossref

A state-of-the-art of bond and lap-splice of steel/FRP bars in recycled aggregate concrete

Bassam Wazir Bdaiwi, Kabir Sadeghi, Akram S. Mahmoud

Proceedings of the Institution of Civil Engineers - Construction Materials · 04.11.2026 · 179 (6) · 397-408

DOI: 10.1680/jcoma.25.00152 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Civil Engineers - Construction Materials, online erschienen am 23.06.2026. Verfasst von Bassam Wazir Bdaiwi und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recycled aggregate concrete (RAC) is rapidly emerging as a viable structural material; however, its comparatively weaker microstructure poses challenges for bond and splice behaviour, which are critical to structural safety. This review systematically analyses 38 experimental and numerical studies concerning the effects of RAC replacement ratio, reinforcement type, and confinement systems on bond and splice behaviour. When fully replacing natural aggregate, RAC demonstrates a bonding capacity approximately 25% lower, primarily due to the porous nature of the interfacial transition zone. Consequently, the required splice lengths under unconfined conditions are 35–40 bar diameters for steel reinforcement and 60–75 bar diameters for fibre-reinforced polymer (FRP) reinforcement. Confinement strategies, particularly transverse reinforcement and external FRP wrapping, effectively mitigate brittle splitting failures and promote ductile behaviour. Current design codes (ACI 318; Eurocode 2), calibrated for natural-aggregate concrete, inadequately address the distinct properties of RAC. To bridge this gap, this review proposes a recycled-aggregate reduction factor (ψr), analogous to the lightweight-concrete factor in existing codes. This factor provides engineers with a code-compliant methodology for the safe design of RACs, supporting the broader adoption of sustainable construction materials.

Zitieren

APA

Bdaiwi, B. W., Sadeghi, K., & Mahmoud, A. S. (2026). A state-of-the-art of bond and lap-splice of steel/FRP bars in recycled aggregate concrete. Proceedings of the Institution of Civil Engineers - Construction Materials, 179(6), 397-408. https://doi.org/10.1680/jcoma.25.00152

Vancouver

Bdaiwi BW, Sadeghi K, Mahmoud AS. A state-of-the-art of bond and lap-splice of steel/FRP bars in recycled aggregate concrete. Proceedings of the Institution of Civil Engineers - Construction Materials. 2026;179(6):397-408. doi:10.1680/jcoma.25.00152

BibTeX
@article{Bdaiwi2026,
  author = {Bdaiwi, Bassam Wazir and Sadeghi, Kabir and Mahmoud, Akram S.},
  title = {A state-of-the-art of bond and lap-splice of steel/FRP bars in recycled aggregate concrete},
  journal = {Proceedings of the Institution of Civil Engineers - Construction Materials},
  year = {2026},
  volume = {179},
  number = {6},
  pages = {397--408},
  doi = {10.1680/jcoma.25.00152}
}
Kostenlos starten →