Northlights or in-plane rooflights? Thermal energy comparison
Proceedings of the Institution of Civil Engineers - Energy · 2012
DOI: 10.1680/ener.11.00008 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Civil Engineers - Energy, 2012. Verfasst von Christopher Kendrick und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 10 Literaturangaben.
Abstract (Originalsprache)
Overheating owing to solar heat gain through in-plane rooflights in industrial shed-type buildings leads to thermal discomfort, increasing demand for artificial cooling and higher energy consumption and carbon dioxide emissions. This paper argues that by using a saw-tooth roof configuration with northlights, overheating in summer is significantly reduced without impairing the quality of daylighting. A comparison of the daylighting and thermal performance of conventional (in-plane) rooflights with a northlight configuration is described, using Lumen Designer for daylighting and TAS (dynamic thermal simulation software) to assess energy needed for heating and cooling. Although daylighting performance of northlights is lower for a given percentage of rooflighting, and heating requirements are 10% higher, the overheating is much reduced. As summer conditions are likely to be increasingly important and heating demand will reduce, it is suggested that modern northlight solutions should be developed.
Zitieren
APA
Kendrick, C., Ogden, R., Wang, X., & Walliman, N. (2012). Northlights or in-plane rooflights? Thermal energy comparison. Proceedings of the Institution of Civil Engineers - Energy. https://doi.org/10.1680/ener.11.00008
Vancouver
Kendrick C, Ogden R, Wang X, Walliman N. Northlights or in-plane rooflights? Thermal energy comparison. Proceedings of the Institution of Civil Engineers - Energy. 2012. doi:10.1680/ener.11.00008
BibTeX
@article{Kendrick2012,
author = {Kendrick, Christopher and Ogden, Ray and Wang, Xiaoxin and Walliman, Nicholas},
title = {Northlights or in-plane rooflights? Thermal energy comparison},
journal = {Proceedings of the Institution of Civil Engineers - Energy},
year = {2012},
doi = {10.1680/ener.11.00008}
}
EUVIMED