EUVIMEDEUVIMED entdecken
Crossref

Selenides for nonlinear optical applications

N. B. Singh, G. Kanner, M. Marable, A. Berghmans, D. Knuteson, D. Kahler, B. Wagner, M. King

Emerging Materials Research · 2012

DOI: 10.1680/emr.11.00012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Emerging Materials Research, 2012. Verfasst von N. B. Singh und 7 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 26 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The authors have developed several binary, ternary, and quaternary selenide crystals for nonlinear optical (NLO) applications. The authors present an overview of the crystal growth and characterization of bulk and quasi-phase matched (QPM) crystals for their applications in mid-wave infrared (MWIR) and long-wave infrared (LWIR) regions. The authors have summarized the crystal growth, fabrication, and performance of gallium selenide and ternary and quaternary selenide compounds, silver gallium selenide, thallium arsenic selenide, and silver gallium germanium selenide crystals. Large crystals are grown by Bridgman method from the melt. These crystals transmit up to 16 μm wavelength, have high value of nonlinear conversion merit (d2/n3, d is the NLO coefficient, n is the refractive index) and have the lowest absorption coefficient compared to arsenides, phosphides, and other NLO materials. In addition to bulk crystals, the authors have developed ZnSe-based QPM materials for the MWIR and LWIR regions. The authors present their recent progress in the development of optical parametric ZnSe (OPZnSe) devices. Transmission measurements for these QPM film of thickness exceeding 1 mm show low-optical loss from 1 to 12 μm wavelength region. Nonlinear frequency conversion experiments were performed, demonstrating the vast spectral range of this material. Near-infrared wavelength conversion at 0.8 μm was obtained by frequency doubling a 1.6 μm wavelength beam with these devices.

Zitieren

APA

Singh, N. B., Kanner, G., Marable, M., Berghmans, A., Knuteson, D., Kahler, D., Wagner, B., & King, M. (2012). Selenides for nonlinear optical applications. Emerging Materials Research. https://doi.org/10.1680/emr.11.00012

Vancouver

Singh NB, Kanner G, Marable M, Berghmans A, Knuteson D, Kahler D, et al. Selenides for nonlinear optical applications. Emerging Materials Research. 2012. doi:10.1680/emr.11.00012

BibTeX
@article{Singh2012,
  author = {Singh, N. B. and Kanner, G. and Marable, M. and Berghmans, A. and Knuteson, D. and Kahler, D. and Wagner, B. and King, M.},
  title = {Selenides for nonlinear optical applications},
  journal = {Emerging Materials Research},
  year = {2012},
  doi = {10.1680/emr.11.00012}
}
Kostenlos starten →