EUVIMEDEUVIMED entdecken
Crossref

Influence of loading rate on failure mode of reinforced concrete members

Philip Isaac, Antony Darby, Tim Ibell, Mark Evernden

Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics · 2013

DOI: 10.1680/eacm.12.00002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics, 2013. Verfasst von Philip Isaac und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 23 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The lack of simplified methods for accurately predicting the response mode of reinforced concrete structural members (predominantly beams and columns) to impulsive loads indicates a lack of fundamental understanding of the complicated response of members in this situation. This often leads to engineers using over-simplified analytical methods or developing complex finite-element models, the reliability of which has been questioned. This paper presents the development of a theoretical model for predicting the initial demand on a reinforced concrete member subjected to impulsive loads, which can be used to show whether a brittle shear failure results. The model treats the response as being dominated by a wave phenomenon and employing a time increment approach to solve the equation of motion. Under impact loading, the model is able to demonstrate why higher velocity impacts are more likely to cause brittle shear failures in reinforced concrete beams than slower ones for the same impact energy. The paper concludes by extending the proposed method to predict the shear and bending demands on a blast-loaded member. It is hoped that through this new analytical model, design guidelines for new structures can be improved and better assessments of the vulnerability of existing structures can be carried out.

Zitieren

APA

Isaac, P., Darby, A., Ibell, T., & Evernden, M. (2013). Influence of loading rate on failure mode of reinforced concrete members. Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics. https://doi.org/10.1680/eacm.12.00002

Vancouver

Isaac P, Darby A, Ibell T, Evernden M. Influence of loading rate on failure mode of reinforced concrete members. Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics. 2013. doi:10.1680/eacm.12.00002

BibTeX
@article{Isaac2013,
  author = {Isaac, Philip and Darby, Antony and Ibell, Tim and Evernden, Mark},
  title = {Influence of loading rate on failure mode of reinforced concrete members},
  journal = {Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics},
  year = {2013},
  doi = {10.1680/eacm.12.00002}
}
Kostenlos starten →