EUVIMEDEUVIMED entdecken
Crossref

Gas film/regenerative composite cooling characteristics of the liquid oxygen/liquid methane (LOX/LCH4) rocket engine

Xinlin Liu, Jun Sun, Zhuohang Jiang, Qinglian Li, Peng Cheng, Jie Song

Journal of Zhejiang University-SCIENCE A · 2024-08 · 25 (8) · 631-649

DOI: 10.1631/jzus.a2300365 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Zhejiang University-SCIENCE A, online erschienen am 11.06.2024. Verfasst von Xinlin Liu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 56 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The thermal protection of rocket engines is a crucial aspect of rocket engine design. In this paper, the gas film/regenerative composite cooling of the liquid oxygen/liquid methane (LOX/LCH4) rocket engine thrust chamber was investigated. A gas film/regenerative composite cooling model was developed based on the Grisson gas film cooling efficiency formula and the one-dimensional regenerative cooling model. The accuracy of the model was validated through experiments conducted on a 6 kg/s level gas film/regenerative composite cooling thrust chamber. Additionally, key parameters related to heat transfer performance were calculated. The results demonstrate that the model is sufficiently accurate to be used as a preliminary design tool. The temperature rise error of the coolant, when compared with the experimental results, was found to be less than 10%. Although the pressure drop error is relatively large, the calculated results still provide valuable guidance for heat transfer analysis. In addition, the performance of composite cooling is observed to be superior to regenerative cooling. Increasing the gas film flow rate results in higher cooling efficiency and a lower gas-side wall temperature. Furthermore, the position at which the gas film is introduced greatly impacts the cooling performance. The optimal introduction position for the gas film is determined when the film is introduced from a single row of holes. This optimal introduction position results in a more uniform wall temperature distribution and reduces the peak temperature. Lastly, it is observed that a double row of holes, when compared to a single row of holes, enhances the cooling effect in the superposition area of the gas film and further lowers the gas-side wall temperature. These results provide a basis for the design of gas film/regenerative composite cooling systems.

Zitieren

APA

Liu, X., Sun, J., Jiang, Z., Li, Q., Cheng, P., & Song, J. (2024). Gas film/regenerative composite cooling characteristics of the liquid oxygen/liquid methane (LOX/LCH4) rocket engine. Journal of Zhejiang University-SCIENCE A, 25(8), 631-649. https://doi.org/10.1631/jzus.a2300365

Vancouver

Liu X, Sun J, Jiang Z, Li Q, Cheng P, Song J. Gas film/regenerative composite cooling characteristics of the liquid oxygen/liquid methane (LOX/LCH4) rocket engine. Journal of Zhejiang University-SCIENCE A. 2024;25(8):631-649. doi:10.1631/jzus.a2300365

BibTeX
@article{Liu2024,
  author = {Liu, Xinlin and Sun, Jun and Jiang, Zhuohang and Li, Qinglian and Cheng, Peng and Song, Jie},
  title = {Gas film/regenerative composite cooling characteristics of the liquid oxygen/liquid methane (LOX/LCH4) rocket engine},
  journal = {Journal of Zhejiang University-SCIENCE A},
  year = {2024},
  volume = {25},
  number = {8},
  pages = {631--649},
  doi = {10.1631/jzus.a2300365}
}
Kostenlos starten →