EUVIMEDEUVIMED entdecken
Crossref

EXPERIMENTAL STUDY ON THE EFFECT OF DWELL TIMING ON FUEL ADHESION CHARACTERISTICS FROM TRIPLE-INJECTION SPRAY IMPINGEMENT UNDER COLD-START CONDITIONS

Hongliang Luo, Chao Lu, Chang Zhai, Long Liu, Keyan Liu, Meiqi Yu, Qing Wu, Liqiu Wang

Atomization and Sprays · 2026 · 36 (4) · 37-62

DOI: 10.1615/atomizspr.2026063429 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Atomization and Sprays, 2026. Verfasst von Hongliang Luo und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 41 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The issue of fuel adhesion resulting from spray-wall impingement during the cold-start phase of direct injection (DI) engines was addressed experimentally. This study investigated the effects of different dwell-timing (DT) settings in a triple-injection spray on the dynamic behavior of the wall fuel adhesion. Experiments were conducted using the refractive index matching method within a constant-volume chamber simulating cold-start conditions. A comparative analysis was performed on the mass, thickness, area, distribution uniformity, and spread characteristics of fuel adhesion under three dwelltiming strategies: DT2-5, DT5-2, and DT5-5. The results indicate that the DT5-5 strategy, with the longest total DT, yields the smallest total adhesion mass. The DT2-5 strategy demonstrates the strongest capability for both lateral dispersion and downstream spread of the fuel adhesion, resulting in the largest adhesion area and the smallest thickness. The distribution pattern of the DT has a more pronounced influence on adhesion spread behavior than the total duration alone. Placing the shorter interval in the initial segment is more conducive to enhancing spread. Furthermore, this study proposed and compared three definitions of the fuel adhesion angle. The half mass angle is considered to provide a more comprehensive reflection of the adhesion distribution characteristics. This research offers experimental evidence and theoretical support for optimizing split-injection strategies to reduce unburned emissions from DI engines during cold start.

Zitieren

APA

Luo, H., Lu, C., Zhai, C., Liu, L., Liu, K., Yu, M., Wu, Q., & Wang, L. (2026). EXPERIMENTAL STUDY ON THE EFFECT OF DWELL TIMING ON FUEL ADHESION CHARACTERISTICS FROM TRIPLE-INJECTION SPRAY IMPINGEMENT UNDER COLD-START CONDITIONS. Atomization and Sprays, 36(4), 37-62. https://doi.org/10.1615/atomizspr.2026063429

Vancouver

Luo H, Lu C, Zhai C, Liu L, Liu K, Yu M, et al. EXPERIMENTAL STUDY ON THE EFFECT OF DWELL TIMING ON FUEL ADHESION CHARACTERISTICS FROM TRIPLE-INJECTION SPRAY IMPINGEMENT UNDER COLD-START CONDITIONS. Atomization and Sprays. 2026;36(4):37-62. doi:10.1615/atomizspr.2026063429

BibTeX
@article{Luo2026,
  author = {Luo, Hongliang and Lu, Chao and Zhai, Chang and Liu, Long and Liu, Keyan and Yu, Meiqi and Wu, Qing and Wang, Liqiu},
  title = {EXPERIMENTAL STUDY ON THE EFFECT OF DWELL TIMING ON FUEL ADHESION CHARACTERISTICS FROM TRIPLE-INJECTION SPRAY IMPINGEMENT UNDER COLD-START CONDITIONS},
  journal = {Atomization and Sprays},
  year = {2026},
  volume = {36},
  number = {4},
  pages = {37--62},
  doi = {10.1615/atomizspr.2026063429}
}
Kostenlos starten →