EXPERIMENTAL STUDY OF NOZZLE LENGTH-DIAMETER RATIO ON DIESEL CAVITATION AND SPRAY CHARACTERISTICS IN REAL-SIZE NOZZLE
Atomization and Sprays · 2026 · 36 (6) · 1-20
DOI: 10.1615/atomizspr.2026063134 ↗Kurz gefasst
Fachartikel in der Zeitschrift Atomization and Sprays, 2026. Verfasst von Wei Yu und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben.
Abstract (Originalsprache)
In-orifice cavitation characteristics significantly affect fuel spray breakup and mixture formation. Based on a shadowgraph visualization platform, this study employs a high-speed microscopy to dynamically capture geometry-induced cavitation, string cavitation, and near-field spray characteristics inside transparent nozzle with real-size orifice. It investigates the influence of length-diameter (L/D) ratio on transient in-orifice cavitation characteristics and spray cone angle at the nozzle exit while comparing the cavitation behaviors of diesel and gasoline. Results show that string cavitation tends to occur at low needle lift and contributes to an increased spray cone angle at the nozzle exit. Geometry-induced cavitation originates at the rounded corner of the orifice inlet on the lower side and gradually extends toward the orifice exit as injection proceeds. The L/D ratio exerts a critical influence on the formation and development of cavitation. Orifices with a smaller L/D ratio exhibit earlier cavitation inception, a longer time to reach stable cavitation, and a larger spray cone angle. Cavitation formation is closely associated with the pressure difference. Increasing injection pressure advances both cavitation inception and the transition to stable cavitation while enhancing the average spray cone angle. Gasoline exhibits the same variation trends of cavitation and spray cone angle as diesel, but its average cavitation percentage and average spray cone angle are significantly larger than those of diesel. This study provides data support for the optimization and innovation of injector orifice L/D ratio.
Zitieren
APA
Yu, W., Zheng, J., Wu, J., Xue, J., & Niu, W. (2026). EXPERIMENTAL STUDY OF NOZZLE LENGTH-DIAMETER RATIO ON DIESEL CAVITATION AND SPRAY CHARACTERISTICS IN REAL-SIZE NOZZLE. Atomization and Sprays, 36(6), 1-20. https://doi.org/10.1615/atomizspr.2026063134
Vancouver
Yu W, Zheng J, Wu J, Xue J, Niu W. EXPERIMENTAL STUDY OF NOZZLE LENGTH-DIAMETER RATIO ON DIESEL CAVITATION AND SPRAY CHARACTERISTICS IN REAL-SIZE NOZZLE. Atomization and Sprays. 2026;36(6):1-20. doi:10.1615/atomizspr.2026063134
BibTeX
@article{Yu2026,
author = {Yu, Wei and Zheng, Jinbao and Wu, Jiajun and Xue, Jialiang and Niu, Wenshuai},
title = {EXPERIMENTAL STUDY OF NOZZLE LENGTH-DIAMETER RATIO ON DIESEL CAVITATION AND SPRAY CHARACTERISTICS IN REAL-SIZE NOZZLE},
journal = {Atomization and Sprays},
year = {2026},
volume = {36},
number = {6},
pages = {1--20},
doi = {10.1615/atomizspr.2026063134}
}
EUVIMED