EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Computational analysis of stress concentration in steel plates with holes: Systematic determination of the stress concentration factor

Cimark Guimarães Sandes Filho, Nathalia Rangel Dantas, André Luís Christoforo, Adriel Augusto dos Santos Silva

Cerâmica · 2026 · 72

DOI: 10.1590/xebq5844 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Cerâmica, 2026. Verfasst von Cimark Guimarães Sandes Filho und 3 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The concentrations of stress and strain along the edges caused by the presence of geometric discontinuities in solids, such as circular, elliptical, and square shapes, have attracted the attention of the scientific community for more than a century due to their wide applicability in engineering. In this context, this research conducts a computational simulation using COMSOL Multiphysics software based on the Finite Element Method (FEM), performing a parametric study varying the dimensions of a perforated plate with a circular hole in seventy-two combinations. The plate has a constant thickness, and the combinations were obtained by varying the width (L), length (a), hole position, and radius (⌀). For a better analysis, the seventy-two combinations were divided into two groups of thirty-six, in which the influence of width (L) variation on the stress concentration factor (k) was evaluated. The results show that varying the plate width from 0.3a to 0.7a does not significantly affect the values of k. Finally, among the analyzed combinations and for the established parameters, the stress-strain curves demonstrated that the regions near the hole edge enter the plastic zone more rapidly, emphasizing the importance of analyzing strain distribution and stress concentration in structural design.

Zitieren

APA

Filho, C. G. S., Dantas, N. R., Christoforo, A. L., & Silva, A. A. D. S. (2026). Computational analysis of stress concentration in steel plates with holes: Systematic determination of the stress concentration factor. Cerâmica, 72. https://doi.org/10.1590/xebq5844

Vancouver

Filho CGS, Dantas NR, Christoforo AL, Silva AADS. Computational analysis of stress concentration in steel plates with holes: Systematic determination of the stress concentration factor. Cerâmica. 2026;72. doi:10.1590/xebq5844

BibTeX
@article{Filho2026,
  author = {Filho, Cimark Guimarães Sandes and Dantas, Nathalia Rangel and Christoforo, André Luís and Silva, Adriel Augusto dos Santos},
  title = {Computational analysis of stress concentration in steel plates with holes: Systematic determination of the stress concentration factor},
  journal = {Cerâmica},
  year = {2026},
  volume = {72},
  doi = {10.1590/xebq5844}
}
Kostenlos starten →