EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative study of obtaining and characterization of polycrystalline diamond sintered via HPHT with different binders (Nb and Ta)

Lucas Pires Paiva Barreto, Diêgo Pires Gurgel, Regina Bertília Dantas de Medeiros, Uílame Umbelino Gomes, Carlson Pereira Souza, Leonardo Oliveira Sousa, Marcello Filgueira, Meysam Mashhadi Karimi

Cerâmica · 2026 · 72

DOI: 10.1590/tofb7203 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Cerâmica, 2026. Verfasst von Lucas Pires Paiva Barreto und 7 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polycrystalline diamond (PCD) is widely used in cutting and drilling tools but faces challenges, including graphitization and environmental and health concerns related to its traditional binders, such as cobalt. This study explores the route to obtaining PCD composites using niobium and tantalum as alternative binders, evaluating composites with 15 wt% binder sintered via HPHT at 1650ºC, 1750ºC, and 1850ºC under 7.7 GPa. The starting powders and milled mixtures were characterized by XRD, particle size analysis, and SEM, while the sintered samples were subjected to densitometry and Brazilian disk compression tests. The samples containing tantalum showed higher densification and compressive strength than those containing niobium, and these properties increased with temperature. Low levels of graphitization were detected, but with negligible impacts on the properties analyzed, indicating these compositions through the HPHT route are promising and more sustainable alternatives to conventional PCD.

Förderung

  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil

Zitieren

APA

Barreto, L. P. P., Gurgel, D. P., Medeiros, R. B. D. D., Gomes, U. U., Souza, C. P., Sousa, L. O., Filgueira, M., & Karimi, M. M. (2026). Comparative study of obtaining and characterization of polycrystalline diamond sintered via HPHT with different binders (Nb and Ta). Cerâmica, 72. https://doi.org/10.1590/tofb7203

Vancouver

Barreto LPP, Gurgel DP, Medeiros RBDD, Gomes UU, Souza CP, Sousa LO, et al. Comparative study of obtaining and characterization of polycrystalline diamond sintered via HPHT with different binders (Nb and Ta). Cerâmica. 2026;72. doi:10.1590/tofb7203

BibTeX
@article{Barreto2026,
  author = {Barreto, Lucas Pires Paiva and Gurgel, Diêgo Pires and Medeiros, Regina Bertília Dantas de and Gomes, Uílame Umbelino and Souza, Carlson Pereira and Sousa, Leonardo Oliveira and Filgueira, Marcello and Karimi, Meysam Mashhadi},
  title = {Comparative study of obtaining and characterization of polycrystalline diamond sintered via HPHT with different binders (Nb and Ta)},
  journal = {Cerâmica},
  year = {2026},
  volume = {72},
  doi = {10.1590/tofb7203}
}
Kostenlos starten →