Influence of the Addition of Eggshell Ash on the Strength of 1:3 Mortars
Cerâmica · 2026 · 72
DOI: 10.1590/oxfe5937 ↗Kurz gefasst
Fachartikel in der Zeitschrift Cerâmica, 2026. Verfasst von G. C. Ribeiro und 2 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNPq.
Abstract (Originalsprache)
This study investigates the effect of incorporating eggshell ash (ESA) into 1:3 mortars and its influence on physical, mechanical, and microstructural properties. Mortars were prepared with 0%, 5%, and 10% ESA additions relative to cement weight. Characterization techniques included XRD, SEM, compressive and flexural strength tests, modulus of elasticity, and porosity analysis. Results demonstrated that 5% ESA enhanced early and 28-day compressive strength (31.34±1.14 MPa), reduced porosity (27.95%), and improved microstructure continuity, indicating nucleation and filler effects. In contrast, 10% ESA promoted excess Ca(OH)2 and ettringite formation, increasing heterogeneity and decreasing performance (26.61±1.80 MPa). XRD confirmed secondary phase formation, and SEM images corroborated matrix densification at optimal dosage. The findings suggest that ESA is a viable, eco-friendly additive, with 5% representing an optimal content that maximizes performance without compromising durability. Excess ESA (>10%) may impair mechanical behavior due to calcium oversaturation and porosity increase, highlighting the need for dosage control.
Förderung
- CNPq
Zitieren
APA
Ribeiro, G. C., Garcia, G. R. Z., & Ribeiro, S. (2026). Influence of the Addition of Eggshell Ash on the Strength of 1:3 Mortars. Cerâmica, 72. https://doi.org/10.1590/oxfe5937
Vancouver
Ribeiro GC, Garcia GRZ, Ribeiro S. Influence of the Addition of Eggshell Ash on the Strength of 1:3 Mortars. Cerâmica. 2026;72. doi:10.1590/oxfe5937
BibTeX
@article{Ribeiro2026,
author = {Ribeiro, G. C. and Garcia, G. R. Z. and Ribeiro, S.},
title = {Influence of the Addition of Eggshell Ash on the Strength of 1:3 Mortars},
journal = {Cerâmica},
year = {2026},
volume = {72},
doi = {10.1590/oxfe5937}
}
EUVIMED