EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling and Integrated Control Design for Folding-Wing Aircraft during Morphing Process

Zexin Wang

Journal of Aerospace Technology and Management · 2026 · 18

DOI: 10.1590/jatm.v18.1450 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Aerospace Technology and Management, 2026. Verfasst von Zexin Wang. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes a novel integrated robust control framework tailored for folding-wing aircraft during large-angle morphing maneuvers. The morphing process induces severe nonlinearities, strong coupling between wing kinematics and vehicle dynamics, and significant time-varying shifts in the center of gravity and aerodynamic characteristics, posing substantial challenges to flight stability. To address these issues, a two-time-scale hybrid control architecture is developed: a robust sliding mode controller (SMC) governs the fast inner-loop attitude dynamics to counteract model uncertainties and disturbances, while a well-tuned proportional-integral-derivative (PID) controller manages the slower outer-loop trajectory variables, such as altitude and velocity. A high-fidelity multi-body dynamic model is derived from first principles using Newtonian mechanics, fully accounting for morphing-induced inertial and aerodynamic variations. Extensive closed-loop simulations validate the approach, achieving stable transitions with altitude errors within ± 1.5 m, velocity errors below ± 1.8 m·s-1, and settling times under 50 seconds – even under ± 20% perturbations in aerodynamic coefficients. To the best of the author’ knowledge, this is the first implementation of a hybrid SMC–PID strategy specifically designed for large-scale rigid-body wing reconfiguration, offering a practical and theoretically grounded pathway toward deployable morphing aircraft systems.

Zitieren

APA

Wang, Z. (2026). Modeling and Integrated Control Design for Folding-Wing Aircraft during Morphing Process. Journal of Aerospace Technology and Management, 18. https://doi.org/10.1590/jatm.v18.1450

Vancouver

Wang Z. Modeling and Integrated Control Design for Folding-Wing Aircraft during Morphing Process. Journal of Aerospace Technology and Management. 2026;18. doi:10.1590/jatm.v18.1450

BibTeX
@article{Wang2026,
  author = {Wang, Zexin},
  title = {Modeling and Integrated Control Design for Folding-Wing Aircraft during Morphing Process},
  journal = {Journal of Aerospace Technology and Management},
  year = {2026},
  volume = {18},
  doi = {10.1590/jatm.v18.1450}
}
Kostenlos starten →