EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Electromagnetic Interference Robustness and Synchro-nization Scalability in Wireless Battery Management Systems for Electric Vehicles

Attila Simo, Simona Dzitac, Bogdan-Constantin Neagu, Horea Oros

INTERNATIONAL JOURNAL OF COMPUTERS COMMUNICATIONS & CONTROL · 03.11.2026 · 21 (6)

DOI: 10.15837/ijccc.2026.6.7750 ↗

Kurz gefasst

Fachartikel in der Zeitschrift INTERNATIONAL JOURNAL OF COMPUTERS COMMUNICATIONS & CONTROL, online erschienen am 03.11.2026. Verfasst von Attila Simo und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The transition toward wireless battery management systems (wBMS) promises a substantial reduction in wiring complexity and mass for electric-vehicle (EV) battery packs, yet automotive-grade deployment is still constrained by two interlocking barriers: electromagnetic-interference (EMI) robustness and network-synchronization scalability. Building directly on a companion study that experimentally validated an eight-node chip-on-cell wireless cell-monitoring-unit (CMU) network based on the Dukosi DK8x02 platform, this paper develops and calibrates an analytical framework that projects how that demonstrated architecture, together with a representative time-divisionmultiple- access (TDMA) alternative, behaves as pack size grows toward automotive-relevant node counts. A near-field/far-field link-budget model quantifies the link-margin erosion produced by traction-inverter switching noise for the near-field-communication (NFC) and Bluetooth Low Energy (BLE) physical layers; a bit-error-rate model translates that margin into packet-failure probability; and a discrete time-slot model propagates packet failure into network-formation latency and pack-level current draw, calibrated against the 0.09 A per-CMU current measured in the companion demonstrator and against published automotive wireless-BMS benchmarks. The results show that polling-based NFC networks scale linearly but with roughly an order-of-magnitude higher latency than TDMA/BLE architectures, that electro-magnetic aggression measurably yet noncatastrophically inflates both latency and current draw once adequate link margin and frequencyhopping are present, and that only the TDMA/BLE branch is presently positioned to meet ASILD- class functional-safety timing budgets under ISO 26262. The paper closes with concrete design guidance on shielding placement, slot-time budgeting, and standards alignment for next-generation automotive wBMS.

Zitieren

APA

Simo, A., Dzitac, S., Neagu, B., & Oros, H. (2026). Electromagnetic Interference Robustness and Synchro-nization Scalability in Wireless Battery Management Systems for Electric Vehicles. INTERNATIONAL JOURNAL OF COMPUTERS COMMUNICATIONS & CONTROL, 21(6). https://doi.org/10.15837/ijccc.2026.6.7750

Vancouver

Simo A, Dzitac S, Neagu B, Oros H. Electromagnetic Interference Robustness and Synchro-nization Scalability in Wireless Battery Management Systems for Electric Vehicles. INTERNATIONAL JOURNAL OF COMPUTERS COMMUNICATIONS & CONTROL. 2026;21(6). doi:10.15837/ijccc.2026.6.7750

BibTeX
@article{Simo2026,
  author = {Simo, Attila and Dzitac, Simona and Neagu, Bogdan-Constantin and Oros, Horea},
  title = {Electromagnetic Interference Robustness and Synchro-nization Scalability in Wireless Battery Management Systems for Electric Vehicles},
  journal = {INTERNATIONAL JOURNAL OF COMPUTERS COMMUNICATIONS & CONTROL},
  year = {2026},
  volume = {21},
  number = {6},
  doi = {10.15837/ijccc.2026.6.7750}
}
Kostenlos starten →