EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

E-beam sintering of neodymium tungstate and its composite with nickel (II) and copper (II) oxides

Nikita F. Eremeev, Ekaterina M. Sadovskaya, Tamara A. Krieger, Olga A. Bulavchenko, Vasily V. Kaichev, Anna M. Kremneva, Evgeny A. Suprun, Mostefe Khalid Mohammed, Mikhail A. Mikhailenko, Mikhail V. Korobeynikov, Vladislav A. Sadykov, Yulia N. Bespalko

Electrochemical Materials and Technologies · 22.09.2026 · 5 (3) · 20254077

DOI: 10.15826/elmattech.2026.5.077 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electrochemical Materials and Technologies, online erschienen am 22.09.2026. Verfasst von Nikita F. Eremeev und 11 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 162 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Neodymium tungstates and their composites with metal alloys, such as NiCu, have emerged as promising materials for hydrogen separation membranes due to their high proton conductivity and stability in CO2-containing atmospheres. The fabrication of gas-tight ceramics based on these materials constitutes a distinct challenge. A promising approach to address this issue is the utilization of advanced sintering techniques, such as radiation-thermal sintering using an electron beam. The present study investigates the impact of radiation-thermal sintering temperature on the structural, textural properties, hydration ability, and oxygen mobility of Nd5.5WO11.25−δ oxides and NiO–CuO–Nd5.5WO11.25−δ composites, the precursors of NiCu alloy – Nd5.5WO11.25−δ materials for hydrogen separation membranes. The main phase of the Nd5.5WO11.25−δ samples is defective double fluorite, while their composites contain various nickel and copper oxides along with the neodymium tungstate phase. The attainment of gas-tightness in Nd5.5WO11.25−δ samples is achieved even at relatively low sintering temperatures (1200–1300 °C), which is unattainable through sintering in a furnace. Conversely, the composite samples exhibit high porosity. Hence, the procedure of preparing the NiO–CuO–Nd5.5WO11.25−δ composites required further optimization. Nd5.5WO11.25−δ sintered by e-beam at 1100–1300 °C exhibit optimal hydration properties. The highest oxygen mobility is demonstrated for the samples sintered at 1100 and 1200 °C (D* up to ~ 10−8 cm2/s), which is promising in the context of the incorporation and transport of protons in hydrogen separation membranes. Consequently, e-beam sintering emerges as a promising method for producing proton conductive ceramics based on Nd tungstate.

Zitieren

APA

Eremeev, N. F., Sadovskaya, E. M., Krieger, T. A., Bulavchenko, O. A., Kaichev, V. V., Kremneva, A. M., Suprun, E. A., Mohammed, M. K., Mikhailenko, M. A., Korobeynikov, M. V., Sadykov, V. A., & Bespalko, Y. N. (2026). E-beam sintering of neodymium tungstate and its composite with nickel (II) and copper (II) oxides. Electrochemical Materials and Technologies, 5(3), 20254077. https://doi.org/10.15826/elmattech.2026.5.077

Vancouver

Eremeev NF, Sadovskaya EM, Krieger TA, Bulavchenko OA, Kaichev VV, Kremneva AM, et al. E-beam sintering of neodymium tungstate and its composite with nickel (II) and copper (II) oxides. Electrochemical Materials and Technologies. 2026;5(3):20254077. doi:10.15826/elmattech.2026.5.077

BibTeX
@article{Eremeev2026,
  author = {Eremeev, Nikita F. and Sadovskaya, Ekaterina M. and Krieger, Tamara A. and Bulavchenko, Olga A. and Kaichev, Vasily V. and Kremneva, Anna M. and Suprun, Evgeny A. and Mohammed, Mostefe Khalid and Mikhailenko, Mikhail A. and Korobeynikov, Mikhail V. and Sadykov, Vladislav A. and Bespalko, Yulia N.},
  title = {E-beam sintering of neodymium tungstate and its composite with nickel (II) and copper (II) oxides},
  journal = {Electrochemical Materials and Technologies},
  year = {2026},
  volume = {5},
  number = {3},
  pages = {20254077},
  doi = {10.15826/elmattech.2026.5.077}
}
Kostenlos starten →