A comparative analysis of stamping technologies for straight- and curved-axis components of rail transport rolling stock
Theory and Practice of Metallurgy · 30.06.2026 · (2) · 47-54
DOI: 10.15802/tpm.2.2026.07 ↗Kurz gefasst
Fachartikel in der Zeitschrift Theory and Practice of Metallurgy, online erschienen am 30.06.2026. Verfasst von S. V. Biriukov und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper examines the manufacturing technology for straight- and curved-axis forgings used in the gearbox suspension system of domestic metro traction rolling stock. Emphasis is placed on the specific considerations involved in selecting blank dies for different types of forgings and the need to use them for subsequent blank forming, which will have a positive impact on the quality of the finished product and its stress-strain state following the manufacturing processes. This will be of key importance in the manufacture of forgings for rail transport, as the safety of operations and the quality of passenger service depend on the reliability of the running gear components. The paper also examines the similarities in the general designs of the running gear of urban rail rolling stock, using the examples of suburban electric trains, metro carriages and domestically produced low-floor trams. It identifies the main components characteristic of their bogie designs and draws attention to the location of the traction equipment and its mounting to the bogie frame, taking into account the type of rolling stock and its operating conditions. This article provides a detailed overview of the suspension design for metro carriage gearboxes and highlights the significant number of its component parts manufactured using hot volume forging technology. This underscores the relevance of researching forging processes as a fundamental technology that enables large-scale production of forgings for transport infrastructure requirements. Attention is drawn to the loads borne by the gearbox mounting assembly and its suspension under conditions of significant alternating forces arising during the operation of the traction transmission and the movement of the bogie over irregularities in the track. All these aspects impose stringent requirements on the strength and reliability of these components. The paper also highlights the advantages of using hot volume forging, namely its high productivity and the ability to produce components with enhanced operational characteristics, which will undoubtedly improve the reliability and durability of the forgings manufactured.
Zitieren
APA
Biriukov, S. V., & Chukhlib, V. L. (2026). A comparative analysis of stamping technologies for straight- and curved-axis components of rail transport rolling stock. Theory and Practice of Metallurgy, 47-54. https://doi.org/10.15802/tpm.2.2026.07
Vancouver
Biriukov SV, Chukhlib VL. A comparative analysis of stamping technologies for straight- and curved-axis components of rail transport rolling stock. Theory and Practice of Metallurgy. 2026:47-54. doi:10.15802/tpm.2.2026.07
BibTeX
@article{Biriukov2026,
author = {Biriukov, S. V. and Chukhlib, V. L.},
title = {A comparative analysis of stamping technologies for straight- and curved-axis components of rail transport rolling stock},
journal = {Theory and Practice of Metallurgy},
year = {2026},
number = {2},
pages = {47--54},
doi = {10.15802/tpm.2.2026.07}
}
EUVIMED