Effect of the type of additive and the electroslag welding process using high-chromium cast iron on the structure of the welded metal
Theory and Practice of Metallurgy · 30.06.2026 · (2) · 33-38
DOI: 10.15802/tpm.2.2026.05 ↗Kurz gefasst
Fachartikel in der Zeitschrift Theory and Practice of Metallurgy, online erschienen am 30.06.2026. Verfasst von Yu. M. Kuskov und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The results of experiments on electroslag surfacing with high chromium cast iron in a conventional water cooled mold and in a current conducting mold (CCM) are presented. It is shown that the surfacing method and the type of feed material supplied during surfacing influence the structure of the deposited metal. When surfacing in a conventional mold using a discrete additive in the form of shot with a diameter of 0.8-1.2 mm, the deposited metal solidifies with the formation of a martensitic matrix and a large amount of carbides as a separate structural constituent (35-45%). In the case of surfacing in a CCM, an austenitic matrix is formed with a relatively small amount of carbides (6-9%), but with a high content (~45%) of eutectic. When high chromium cast iron is used in the form of a liquid additive and surfacing is performed in a conventional mold, the deposited metal predominantly has an austenitic structure with a small amount of carbides, 2-4%. The differences in the structure of the deposited metal are explained by the specific features of heat release and mass transfer in the slag bath when using the considered surfacing methods. The identified features of structure formation during electroslag surfacing in conventional and current conducting molds should be taken into account when selecting the surfacing technology depending on the wear conditions of the deposited material.
Zitieren
APA
Kuskov, Y. M., Bogaychuk, I. L., Biktagirov, F. K., Ignatov, A. P., & Netyaga, A. V. (2026). Effect of the type of additive and the electroslag welding process using high-chromium cast iron on the structure of the welded metal. Theory and Practice of Metallurgy, 33-38. https://doi.org/10.15802/tpm.2.2026.05
Vancouver
Kuskov YM, Bogaychuk IL, Biktagirov FK, Ignatov AP, Netyaga AV. Effect of the type of additive and the electroslag welding process using high-chromium cast iron on the structure of the welded metal. Theory and Practice of Metallurgy. 2026:33-38. doi:10.15802/tpm.2.2026.05
BibTeX
@article{Kuskov2026,
author = {Kuskov, Yu. M. and Bogaychuk, I. L. and Biktagirov, F. K. and Ignatov, A. P. and Netyaga, A. V.},
title = {Effect of the type of additive and the electroslag welding process using high-chromium cast iron on the structure of the welded metal},
journal = {Theory and Practice of Metallurgy},
year = {2026},
number = {2},
pages = {33--38},
doi = {10.15802/tpm.2.2026.05}
}
EUVIMED