EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental investigation of viscosity and electrical conductivity of CaO – SiO2 – Al2O3 – MgO blast furnace slags as structure-sensitive properties

D. O. Stepanenko, D. M. Togobitska

Theory and Practice of Metallurgy · 2026

DOI: 10.15802/tpm.2.2026.04 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Theory and Practice of Metallurgy, 2026. Verfasst von D. O. Stepanenko und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Experimental investigations of the viscosity (η) and electrical conductivity (χ) of blast furnace slags characteristic of metallurgical enterprises in Ukraine were carried out at different basicity modulus values, (CaO + MgO)/(SiO₂ + Al₂O₃), of 1.01, 1.04, 1.10, and 1.18, over the temperature range of 1273–1773 K (1000–1500 °C). A nonlinear character of the temperature dependences of the viscosity of the slag melts was revealed. The presence of regions of a sharp increase in viscosity in the obtained curves is associated with structural rearrangement of the silicate–aluminate framework, which leads to changes in the flow mechanisms. It was shown that, within the operating temperature range of the blast furnace process (1700–1773 K), viscosity is a function of temperature and chemical composition and can be purposefully controlled by the addition of modifying oxides. Investigations of electrical conductivity revealed its ionic nature and its informativeness as a structural parameter of slag melts. A monotonic increase in χ with increasing temperature, nonlinearity of its dependences, temperature inversion, and differentiation of the values were identified, reflecting stage-wise structural transformations and depolymerization of the structural network. It was established that the convergence of χ values in the low-temperature region and the divergence of the curves in the medium- and high-temperature ranges characterize a change in the role of chemical composition in the formation of the melt structure. The obtained results confirm the prospects of the combined use of viscosity and electrical conductivity for assessing the structural state of blast furnace slags.

Zitieren

APA

Stepanenko, D. O., & Togobitska, D. M. (2026). Experimental investigation of viscosity and electrical conductivity of CaO – SiO2 – Al2O3 – MgO blast furnace slags as structure-sensitive properties. Theory and Practice of Metallurgy. https://doi.org/10.15802/tpm.2.2026.04

Vancouver

Stepanenko DO, Togobitska DM. Experimental investigation of viscosity and electrical conductivity of CaO – SiO2 – Al2O3 – MgO blast furnace slags as structure-sensitive properties. Theory and Practice of Metallurgy. 2026. doi:10.15802/tpm.2.2026.04

BibTeX
@article{Stepanenko2026,
  author = {Stepanenko, D. O. and Togobitska, D. M.},
  title = {Experimental investigation of viscosity and electrical conductivity of CaO – SiO2 – Al2O3 – MgO blast furnace slags as structure-sensitive properties},
  journal = {Theory and Practice of Metallurgy},
  year = {2026},
  doi = {10.15802/tpm.2.2026.04}
}
Kostenlos starten →